Depending on the year of manufacture and model variant, the mounting locations differ.

-unscrew the four screws under the hood (if there are any, pull out the pins).
-unscrew the two screws at the edges of the central lower decorative grille.
-unscrew the screws around the perimeter at the bottom of the bumper (screwed from bottom to top).
-turn the wheels to the left or right side, depending on which side we will disassemble first.

More details

How to remove the front and rear bumper Renault Modus

Author: carsoftos777 | 11-09-2024, 14:16 | How To Remove Bumpers | Views: 122 | Comments: 0

-open the hood.
-under the hood, pull out the four pistons that secure the upper part.
-from the bottom, unscrew the four screws that secure the protection (screwed from the bottom up).
-depending on which side we are disassembling, turn out the wheels.
-in the wheel arches, unscrew one screw on each side and release the fender liners.

More details

How to Remove Front and Rear Bumper Toyota Camry XV40 (2006-2011)

Author: carsoftos777 | 11-09-2024, 01:49 | How To Remove Bumpers | Views: 125 | Comments: 0

-under the hood, pull out seven pins and remove the plastic panel.
-under the panel, unscrew three screws and pull out two pins (screwed and inserted from top to bottom), which secure the upper part of the bumper.
-in the very bottom, unscrew six screws (screwed from bottom to top).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel arches, pull out the pins that secure the fender liners.

More details

How to remove the front and rear bumper Renault/Dacia Sandero (Sandero Stepway) 1 (2008-2012)

Author: carsoftos777 | 11-09-2024, 00:44 | How To Remove Bumpers | Views: 149 | Comments: 0

-open the hood.
-under the hood, unscrew the four screws (screwed from top to bottom), which secure the upper part of the bumper.
-from the bottom, unscrew the nine screws (screwed from bottom to top), which secure the lower part.
-depending on which side we are disassembling, turn out the wheels.
-in the wheel arches, unscrew one screw on each side (just below the wing).

More details

How to Remove Front and Rear Bumper Acura TL (2008-2014)

Author: carsoftos777 | 11-09-2024, 00:09 | How To Remove Bumpers | Views: 109 | Comments: 0

-open the hood.
-under the hood, pull out the pins, release the latches and remove the pads (you need to get access to the upper bumper mounts).
-under the pads, unscrew the four screws that secure the upper part.

More details

How to remove the front and rear bumper Opel VECTRA B (1996 - 2002)

Author: carsoftos777 | 10-09-2024, 23:37 | How To Remove Bumpers | Views: 116 | Comments: 0

-turn the wheels to the left or right side, depending on which side we will disassemble first.
-unscrew the screws in the wheel arches that secure the mudguards.
-move the mudguards to the side and unscrew one screw on each side (the screw heads are facing the engine). It is worth paying attention to these screws, as they often get stuck and the brackets turn in the plastic.

More details

How to Remove Front and Rear Bumper Cadillac XLR

Author: carsoftos777 | 10-09-2024, 21:39 | How To Remove Bumpers | Views: 99 | Comments: 0

Below are the bumper mounting diagrams. The arrows indicate the locations of the screws, nuts and pins.

More details

How to remove the front and rear bumper SEAT Leon I (1999-2005)

Author: carsoftos777 | 10-09-2024, 20:42 | How To Remove Bumpers | Views: 103 | Comments: 0

Depending on the year of manufacture and model variant, the mounting locations may differ.
-Unscrew five screws under the hood (screwed from top to bottom).
-Depending on the model: tear off the side moldings (you need to pry them off with a screwdriver and remove them from the latches) or pull out the plugs and unscrew one screw on each side (in some models these screws may not be there).
-Remove the decorative grilles (cover the fog lights) and unscrew one screw on each side.

More details

How to remove the front and rear bumper Renault/Dacia Sandero (Sandero Stepway) 2 (since 2012)

Author: carsoftos777 | 9-09-2024, 23:45 | How To Remove Bumpers | Views: 137 | Comments: 0

-open the hood.
-under the hood, unscrew the four screws (screwed from top to bottom) that secure the upper part.
-along the perimeter of the lower part of the bumper, unscrew six screws and pull out two pistons (screwed and inserted from bottom to top).
-depending on which side we are going to disassemble, turn out the wheels.

More details

How to remove the front and rear bumper Renault Fluence

Author: carsoftos777 | 9-09-2024, 02:12 | How To Remove Bumpers | Views: 122 | Comments: 0

Depending on the year of manufacture, the mounting locations differ slightly.
Front bumper
- open the hood.
- unscrew the eight screws under the hood (screwed from top to bottom) that secure the upper part.
- unscrew the seven screws from the bottom (screwed from bottom to top) that secure the lower part of the bumper.
- depending on which side we are disassembling, turn out the wheels.
- unscrew the screws in the wheel arches and release the fender liners (front part).

More details

Navigation

Top News

Statistics

Advertisement

Аrchives

Votes