-open the hood.
-under the hood, pull out the four pistons that secure the upper part.
-from the bottom, unscrew the four screws that secure the protection (screwed from the bottom up).
-depending on which side we are disassembling, turn out the wheels.
-in the wheel arches, unscrew one screw on each side and release the fender liners.
-move the fender liners to the side and unscrew one screw on each side that secure the bumper corners to the fenders.
-release the latches in the fenders (pull the corners towards you, if they don't come out, you need to pry them off with a flat screwdriver).
-with an assistant, pull the bumper forward (be careful not to tear the wires).
-disconnect the electrical equipment connectors.
Rear bumper
-open the trunk lid.
-unscrew two screws in the trunk opening.
-unscrew five screws from the bottom side.
-release the fender liners in the wheel arches.
-bend the fender liners to the side and unscrew one screw on each side that secure the corners of the bumper to the fenders.
-release the latches in the fenders (pull the corners towards you) and under the rear lights.
-with an assistant, pull the bumper back (look for the wires).
-disconnect the electrical equipment connectors (if any).

- 3
Tags: