Navigation

Top News

Statistics

Advertisement

СarSoftos.com » Materials for January 2023 year
How to remove front and rear bumper Chevrolet Camaro (2009-2015)


-open the hood.
-under the hood take out six caps and Unscrew the two screws that secure the top.
-turn out the wheels, depending on which side we will disassemble.
-in the wheel wells, Unscrew three screws on each side that secure the fender liner.
-remove the fender liner to the side and Unscrew two screws on each side (one screwed from the bottom up and one screwed from the engine side).
  • LIKE
  • 2
How to remove front and rear bumper Peugeot 806 (Fiat Ulysse, Citroën Evasion, Lancia Zeta)


-open the hood.
-under the hood, Unscrew the screws, release the latches and remove the grille.
-release the latches and pull out the direction indicators.
-Unscrew three screws on each side and remove the headlights.
  • LIKE
  • 1
Author: carsoftos777 | 30-01-2023, 02:38 | Programs for cars and diagnostics | Views: 11 386 | Comments: 0


Description: Autocom 2020.23 is the latest version available for download and allows you to diagnose cars of all brands until 2020. Autocom and Delphi are two identical software, only the interface and logos change.
  • LIKE
  • 14
How to remove the front and rear bumper of the BMW 5-series E60 (E61)


-unscrew the wheels left or right, depending on which side you will unscrew first
-in the wheel wells, Unscrew the screws that secure the fender liner to the bumper.
-under the hood, remove the seal, and Unscrew the bolts under it that secure the upper part of the bumper.
-remove the lower grille and fog lamp trim.
-under the gratings, Unscrew the four screws (spun up)
-(in some modifications) we move the edges of the fender liner to the side and unscrew two bolts on each side that attach the bumper to the wings (twisted from the bottom up).
  • LIKE
  • 1
How to remove front and rear bumper Peugeot Boxer (Citroën Jumper, Fiat Ducato) (1994-2006)


Depending on the year of manufacture, the attachment points differ slightly.
Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws. Bumpers are removed very easily, and there is not much to describe here. It is more difficult to unscrew the screws than to find them.
  • LIKE
  • 1
Author: carsoftos777 | 29-01-2023, 23:10 | How To Remove Bumpers | Views: 647 | Comments: 0
How to remove the front and rear bumper AUDI A5


The bumper is removed along with the grille.
Depending on the year of manufacture and type of model, the attachment points differ slightly.
  • LIKE
  • 1
Author: carsoftos777 | 29-01-2023, 03:43 | Programs for cars and diagnostics | Views: 723 | Comments: 0
Carly OBD2 for BMW and Others 48.57 Full


Description: A program for testing the computer of BMW cars.
Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
  • LIKE
  • 2
Author: carsoftos777 | 29-01-2023, 03:41 | How To Remove Bumpers | Views: 654 | Comments: 0
How to remove the front and rear bumper AUDI Q5


The bumper is removed along with the grille.
Depending on the year of manufacture and type of model, the attachment points differ slightly.
  • LIKE
  • 1
Author: carsoftos777 | 29-01-2023, 03:38 | How To Remove Bumpers | Views: 554 | Comments: 0
How to remove the front and rear bumper AUDI 80 B4


-in the center of the bumper at the very bottom, unscrew the bolt (under the curly screwdriver)
-along the edges of the front part of the bumper, remove the decorative grilles (if any) and unscrew the two bolts with a hex head (usually 6mm), they are twisted from the bottom up.
-pull off the edges of the bumper from the side locks (pull the edge of the bumper down and towards you)
- now you can disconnect the connectors from the fog lights and direction indicators (if any)
  • LIKE
  • 1


Description: The ETKA electronic catalog contains complete information about spare parts and accessories for VAG vehicles (VW, Seat, Skoda, AUDI), including minibuses.
  • LIKE
  • 5