СarSoftos.com » Materials for February 2023 year
Author: carsoftos777 | 27-02-2023, 04:50 | How To Remove Bumpers | Views: 766 | Comments: 0
How to remove front and rear bumper BMW 3-series E30


To remove the front bumper, you usually need to unscrew only two bolts (under the internal hex), which are twisted from the bottom up. If the bolts are stuck or the edges are licked, you can unscrew the mounting plates on the bumper (two nuts per side), or disconnect the shock absorbers themselves (three nuts per side), although these options are much more complicated than the main one.
  • LIKE
  • 1
How to remove front and rear bumper of Chevrolet Rezzo (Daewoo Tacuma)


-open the hood.
-under the hood, Unscrew the screws, release the latches and remove the grille.
-on the perimeter of the lower part, Unscrew the screws that secure the protection.
  • LIKE
  • 1
Author: carsoftos777 | 27-02-2023, 02:09 | Programs for cars and diagnostics | Views: 4 415 | Comments: 1


Description: Renault Can Clip software, which is a service software that performs maintenance and diagnostics of Renault and Dacia cars. Using the software, it is possible to carry out a complete diagnosis of the ECU of machines (automatic transmission, engine-injector, standard xenon, ABS + ESP, climate control, airbags, dashboard, TsKBES).
  • LIKE
  • 3
Author: carsoftos777 | 26-02-2023, 03:37 | How To Remove Bumpers | Views: 1 251 | Comments: 0
How to remove front and rear bumper Peugeot 508


-open the hood.
-under the hood, Unscrew the screws and take out the caps that secure the trim.
-Unscrew the screws that secure the top.
-around the perimeter of the lower part, Unscrew the screws that secure the lower part.
-depending on which side we will disassemble, turn the wheels.
-in the wheel arches, Unscrew the screws and release the fender liner (completely can not be removed).
  • LIKE
  • 2
Author: carsoftos777 | 26-02-2023, 03:35 | How To Remove Bumpers | Views: 494 | Comments: 0


-open the hood.
-under the hood, Unscrew the four screws (spun down) that secure the top.
-Unscrew the screws around the perimeter of the bottom.
  • LIKE
  • 1
Author: carsoftos777 | 26-02-2023, 02:23 | Programs for cars and diagnostics | Views: 991 | Comments: 1
Carly OBD2 for BMW and Others 48.61 Full


Description: A program for testing the computer of BMW cars.
Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
  • LIKE
  • 1
How to remove the front and rear bumper Cadillac Escalade GMT900 (2007-2013)


Depending on the body type, the attachment points may differ.
Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws and caps.
  • LIKE
  • 1
Author: carsoftos777 | 22-02-2023, 03:23 | How To Remove Bumpers | Views: 368 | Comments: 0


- remove the grille
- unscrew the self-tapping screw under the grate
-along the edges of the front part of the bumper, remove the decorative grilles (if any) and Unscrew the two hex bolts, they are twisted from the bottom up.
-pull off the edges of the bumper from the side locks (pull the edge of the bumper down and towards you).
  • LIKE
  • 1
Author: carsoftos777 | 21-02-2023, 22:17 | Programs for cars and diagnostics | Views: 15 978 | Comments: 0


Description: ISTA+ is a dealer program designed for diagnostics and maintenance of BMW vehicles.
  • LIKE
  • 10
How to remove front and rear bumper Peugeot 807 (Fiat Ulysse 2, Lancia Phedra, Citroën C8)


-open the hood.
-under the hood take out the caps that secure the top.
- around the perimeter of the lower part, unscrew the fasteners (you need to turn a quarter of a turn).
-in the wheel arches, Unscrew the screws and take out the caps, release the fender liner.
-for the fender liner, Unscrew the screws that attach the corners to the wings.
  • LIKE
  • 1