СarSoftos.com » Materials for May 2023 year
Author: carsoftos777 | 28-05-2023, 03:37 | Programs for cars and diagnostics | Views: 1 515 | Comments: 0
Carista 7.5 Pro Full


Description: Carista OBD2 Sees ALL blocks, errors on them, resets errors. Maybe something to configure, encode.
The program significantly increased the number of readable blocks by the engine ECU, the program allows you to read and erase the errors of the ABS.AIR BAG blocks AND NOT ONLY.
  • LIKE
  • 1


Depending on the year of manufacture and body type, the attachment points differ slightly.
Front bumper
-open the hood.
-under the hood take out four pistons (inserted from top to bottom).
-(before restyling) pull up the grille.
  • LIKE
  • 1
Author: carsoftos777 | 28-05-2023, 03:21 | How To Remove Bumpers | Views: 640 | Comments: 0


-open the hood.
-under the hood, Unscrew the four screws and remove the grille (the bottom is held on by latches, you need to pull it towards you).
-from the bottom, Unscrew the seven screws (spun up).
-turn the wheels to the side.
-in the wheel wells, Unscrew three screws on each side that secure the fender liner (front), release the fender liner from the bumper.
  • LIKE
  • 1


Description: Scania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles and Scania industrial and marine engines.
The program is designed to ensure the operation of the electrical system in the CAN network.
  • LIKE
  • 3
How to remove front and rear bumper Acura RL (Honda Legend) (2005-2012)


Depending on the year of manufacture, the attachment points may differ.
-open the hood.
-under the hood take out the six caps that secure the top.
  • LIKE
  • 1
Author: carsoftos777 | 16-05-2023, 16:29 | How To Remove Bumpers | Views: 479 | Comments: 0
How to remove front and rear bumper Skoda Superb 1 (B5)


Depending on the year of manufacture and model variant, the attachment points may differ slightly.

-open the hood, Unscrew the three screws opposite the radiator (spun down).
-Unscrew the screws around the perimeter at the bottom of the bumper (spun up).
-Unscrew the wheels to the left or right side, depending on which side you will disassemble first.
-in the wheel wells, Unscrew the screws that secure the fender liner.
-move the fender liner to the side and Unscrew one screw on each side (spun up) that attach the corners to the wings.
  • LIKE
  • 1


Description: The original catalog for the selection of Toyota & Lexus spare parts.
  • LIKE
  • 6
Author: carsoftos777 | 15-05-2023, 14:06 | Auto repair manual / Subaru | Views: 388 | Comments: 0


Description: Subaru Legacy / Outback (BN-BS) 2019 model year repair and maintenance manual.
  • LIKE
  • 1
Author: carsoftos777 | 11-05-2023, 01:58 | Programs for cars and diagnostics | Views: 1 264 | Comments: 0


Description: bimmer-tool allows you to read and delete trouble codes, restore DPF, read engine parameters and much more in BMW cars.
  • LIKE
  • 3


Depending on the year of manufacture, the attachment points may differ.
Front bumper
-open the hood.
-under the hood, Unscrew the four screws and take out the two pistons that secure the trim over the grille.
-we release the hood latch cable.
-depending on which side we will disassemble, turn the wheels.
-we release the lining of the wings (hold on the latches, starting from the bottom, pull towards you).
-in the wheel wells, take out the caps and release the fender liner (no need to remove).
  • LIKE
  • 2