How to remove front and rear bumper Skoda Superb 1 (B5)

Depending on the year of manufacture and model variant, the attachment points may differ slightly.

-open the hood, Unscrew the three screws opposite the radiator (spun down).
-Unscrew the screws around the perimeter at the bottom of the bumper (spun up).
-Unscrew the wheels to the left or right side, depending on which side you will disassemble first.
-in the wheel wells, Unscrew the screws that secure the fender liner.
-move the fender liner to the side and Unscrew one screw on each side (spun up) that attach the corners to the wings.

-pulls the bumper from the rails towards you.
-remove the connector from the parking sensors (if any).
-if there are fog lights, remove the connector.
-if there are headlight washers, disconnect the hose and plug it with a stopper so that no liquid flows out of the reservoir.

Rear bumper

Depending on the year of manufacture and model variant, the attachment points may differ slightly.

-in the trunk, remove the edges of the side trims (you need to gain access to the back of the rear lights).
-under the skins, Unscrew three nuts on each side and remove the rear lights.
-Unscrew the screws under the rear lights.
-Unscrew the screws in the opening of the trunk (spun down).
-Unscrew the screws at the bottom (spun up).

-Unscrew the screws in the wheel arches (in order not to remove the wheels it is more convenient to unscrew with a ratchet with a nozzle).
-with an assistant, pull the bumper from the rails towards you.
-remove the connector from the parking sensors (if any).
Tags: