Chrysler 160 160-G.T. 180 Workshop Manual PDF. This manual contains maintenance and repair procedures for the Chrysler 160 160-G.T. 180. It contains useful information and tips that will help you repair and maintain your vehicle.
You are logged in as a guest, we recommend that you log in or go
process of registration. If you forgot your password, you can restore it
Navigation
Top News
Statistics
Advertisement
Аrchives
Votes
| Rate the site |
-open the hood.
-under the hood, pull out six pins that secure the upper part.
-along the perimeter of the lower part, pull out seven pins that secure the lower part.
-turn the wheels to the side.
-in the wheel arches, pull out the pins, and release the fender liners (front part).
-under the hood, pull out six pins that secure the upper part.
-along the perimeter of the lower part, pull out seven pins that secure the lower part.
-turn the wheels to the side.
-in the wheel arches, pull out the pins, and release the fender liners (front part).
Author: carsoftos777 | 30-04-2025, 23:06 | Programs for cars and diagnostics | Views: 202 | Comments: 0
Chrysler wiring diagrams are designed to provide information regarding the vehicles wiring content. In order to effectively use Chrysler wiring diagrams to diagnose and repair a Chrysler vehicle, it is important to understand all of their features and characteristics.
Service information for Audi A4 2008, Audi A5 Cabriolet 2009, and Audi A5 Coupe 2008 vehicles with 4-cylinder direct injection engines. It contains technical specifications, safety precautions, and repair instructions for engine components including the crankshaft group, cylinder head, lubrication, cooling, and other systems.
Front bumper
- open the hood.
- under the hood, take out the six pins that secure the upper part.
- turn the wheels to the left or right side, depending on which side we will disassemble first.
- in the wheel arches, unscrew four screws on each side that secure the fender liners (front part).
- move the mudguards to the side and unscrew one screw on each side (screwed from the bottom up), which fasten the corners of the bumper to the fenders.
- open the hood.
- under the hood, take out the six pins that secure the upper part.
- turn the wheels to the left or right side, depending on which side we will disassemble first.
- in the wheel arches, unscrew four screws on each side that secure the fender liners (front part).
- move the mudguards to the side and unscrew one screw on each side (screwed from the bottom up), which fasten the corners of the bumper to the fenders.
Author: carsoftos777 | 30-04-2025, 19:20 | Programs for cars and diagnostics | Views: 303 | Comments: 0
