СarSoftos.com » Materials for March 2023 year

Carista 7.2 Pro Full

Author: carsoftos777 | 31-03-2023, 16:37 | Programs for cars and diagnostics | Views: 1 389 | Comments: 0
Carista 7.2 Pro Full


Description: Carista OBD2 Sees ALL blocks, errors on them, resets errors. Maybe something to configure, encode.
The program significantly increased the number of readable blocks by the engine ECU, the program allows you to read and erase the errors of the ABS.AIR BAG blocks AND NOT ONLY.
  • LIKE
  • 3
More details

How to remove front and rear bumper Peugeot 308

Author: carsoftos777 | 31-03-2023, 16:26 | How To Remove Bumpers | Views: 1 313 | Comments: 0
How to remove front and rear bumper Peugeot 308


-open the hood.
-under the hood, take out the caps and Unscrew the screws (inserted and screwed down) that secure the top.
-we release the upper part from the latches (in the places indicated by the arrows you need to press with a flat screwdriver).
-on the perimeter of the lower part, Unscrew the screws (spun up).
-depending on which side we will disassemble, turn the wheels.
-in the wheel arches release the fender liner.
-for the fender liner, Unscrew one screw on each side (spun down) that attach the corners of the bumper to the wings.
  • LIKE
  • 2
More details

How to remove front and rear bumper Peugeot 5008

Author: carsoftos777 | 31-03-2023, 16:22 | How To Remove Bumpers | Views: 631 | Comments: 0
How to remove front and rear bumper Peugeot 5008


-open the hood.
-under the hood, Unscrew the two screws and take out the two pistons that secure the top.
-around the perimeter of the lower part, Unscrew the eight screws that secure the lower part.
  • LIKE
  • 1
More details

John Deere Service Advisor 5.3.93 CF[08.2020] & AG [08.2020] + Setup [2020] Full

Author: carsoftos777 | 31-03-2023, 15:41 | Programs for cars and diagnostics | Views: 6 476 | Comments: 0


Description: John Deere Service Advisor Dealer Repair Manual, Maintenance, John Deere Wiring Diagrams.
The dealer repair base contains detailed repair manuals, electrical and hydraulic diagrams, special operating instructions for all models of equipment, operation and maintenance manuals, technical characteristics and specifications, test results for all equipment, tightening torques, filling volumes, as well as a catalog of special John Deere tool.
  • LIKE
  • 2
More details

How to remove the front and rear bumper AUDI A3

Author: carsoftos777 | 31-03-2023, 15:34 | How To Remove Bumpers | Views: 215 | Comments: 0
How to remove the front and rear bumper AUDI A3


The bumper is removed easily and the whole process does not take much time.
-under the hood take out the caps that attach the bumper to the top frame.
-along the entire length at the bottom of the bumper, Unscrew the screws securing the engine protection to the bumper.
-Unscrew the wheels left or right, depending on which side of the bumper will be unscrewed first.
-Unscrew three screws on each side (usually poses an asterisk) that attach the fender liner to the bumper.
-pull off the edges of the bumper from the side rails.
  • LIKE
  • 1
More details

How to remove the front and rear bumper AUDI A6 C4

Author: carsoftos777 | 31-03-2023, 15:29 | How To Remove Bumpers | Views: 285 | Comments: 0
How to remove the front and rear bumper AUDI A6 C4


In my opinion the most successful bumper mounting design. The bumper is removed in 5 minutes but at the same time it is very securely held on the car.
  • LIKE
  • 1
More details

John Deere/Hitachi Parts Advisor 06/2022 v1.18.12 [Multi] Full

Author: carsoftos777 | 26-03-2023, 20:21 | Programs for cars and diagnostics | Views: 1 371 | Comments: 0


Description: Catalog for the selection of John Deere and HITACHI spare parts.
  • LIKE
  • 1
More details

How to remove front and rear bumper Acura MDX (2001-2006)

Author: carsoftos777 | 26-03-2023, 19:52 | How To Remove Bumpers | Views: 192 | Comments: 0


Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws, caps and latches.
  • LIKE
  • 1
More details

How to remove the front and rear bumper of the BMW 6-series E63 (E64)

Author: carsoftos777 | 26-03-2023, 19:49 | How To Remove Bumpers | Views: 439 | Comments: 0
How to remove the front and rear bumper of the BMW 6-series E63 (E64)


-unscrew the wheels left or right, depending on which side you will unscrew first
-in the wheel wells, you need to Unscrew the screws that secure the fender liner to the bumper.
-under the hood, remove the seal (pull off towards the engine), and Unscrew the bolts under it that secure the upper part of the bumper.
-remove the lower grille and fog lamp trims (attached with latches).
-under the gratings, Unscrew the four screws (spun up)
-pull off the corners from the side latches and pull the bumper towards you (in order not to scratch the paint on the wings, it is better to do it together).
  • LIKE
  • 1
More details

VAG dataflash [23.03] Full

Author: carsoftos777 | 26-03-2023, 16:28 | Programs for cars and diagnostics | Views: 4 214 | Comments: 0


Description: The database includes firmware files for VAG: Audi, Volkswagen, Skoda, SEAT, Bentley, Lamborghini, MAN for software: ODIS and VCP (Vag Can Pro).
  • LIKE
  • 2
More details
← 1 2 3 4 →