How to remove front and rear bumper Peugeot 5008

-open the hood.
-under the hood, Unscrew the two screws and take out the two pistons that secure the top.
-around the perimeter of the lower part, Unscrew the eight screws that secure the lower part.

-depending on which side we will disassemble, turn the wheels.
-in the wheel arches, Unscrew the screws and release the fender liner (completely can not be removed).
-for the fender liner, Unscrew one screw on each side that attach the corners to the wings.
-we release the latch in the wings (pull the corners towards you).
-pull the bumper forward (be careful not to break the wires and hoses).
-remove the connectors from the fog lights.
-(if any) disconnect the washer hoses (liquid may leak).

Rear bumper

-in the wheel arches, we release the fender liner (you can not remove it completely).
-for the fender liner, Unscrew one screw on each side (spun down) that attach the corners of the bumper to the wings.
-Unscrew the screws that secure the lower part (spun up).

-we release the latch in the wings (pull the corners towards you).
-with an assistant carefully (be careful not to break the wires) pull the bumper back.
-remove connectors from electrical equipment.
Tags: