Bumper mounts.
You are logged in as a guest, we recommend that you log in or go
process of registration. If you forgot your password, you can restore it
Navigation
Top News
Statistics
Advertisement
Аrchives
Votes
| Rate the site |
Author: carsoftos777 | 29-06-2023, 22:11 | Programs for cars and diagnostics | Views: 1 583 | Comments: 0
Description: Connect the ELM 327 OBD interface on (OBD2) your car and run the application: you can find out about engine and gearbox defects, as well as get a complete visualization of all your car data in real time.
Depending on the year of manufacture and model variant, the attachment points may differ slightly.
-under the hood, above the grille, take out the caps and remove the covers.
-near the headlights, Unscrew one screw on each side (spun down) that secure the grille.
-take out the caps around the perimeter at the bottom (inserted from the bottom up).
-Unscrew the wheels to the left or right side, depending on which side you will disassemble first.
-under the hood, above the grille, take out the caps and remove the covers.
-near the headlights, Unscrew one screw on each side (spun down) that secure the grille.
-take out the caps around the perimeter at the bottom (inserted from the bottom up).
-Unscrew the wheels to the left or right side, depending on which side you will disassemble first.
-remove the grille (holds on latches).
-Unscrew the screws that secure the brackets.
-Unscrew the nuts that are attached to the front panel.
-in the wheel wells, Unscrew the screws that attach the bumper to the wings.
-Unscrew the screws that secure the brackets.
-Unscrew the nuts that are attached to the front panel.
-in the wheel wells, Unscrew the screws that attach the bumper to the wings.
Author: carsoftos777 | 26-06-2023, 21:04 | Programs for cars and diagnostics | Views: 11 917 | Comments: 0
Description:
– New versions of Porsche Piwis Tester (41.500 + 38.250);
— Full FAP diagnostic protocol;
— Complete electronic circuits of Porsche cars;
- Reading, decoding, deleting fault codes;
— Reset service intervals;
— View and save the flow of current data;
- View freeze frames of faults;
— Tests of actuators and electronic units;
– New versions of Porsche Piwis Tester (41.500 + 38.250);
— Full FAP diagnostic protocol;
— Complete electronic circuits of Porsche cars;
- Reading, decoding, deleting fault codes;
— Reset service intervals;
— View and save the flow of current data;
- View freeze frames of faults;
— Tests of actuators and electronic units;
-take out the two pistons that secure the top.
-Unscrew the two screws and take out the four pistons around the perimeter of the bottom.
-turn the wheels to the side.
-in the wheel wells, Unscrew two screws on each side and release the fender liner.
-move the fender liner to the side and Unscrew one screw on each side that attach the corners to the wings.
-we release the latch in the wings (pull the corners towards you).
-Unscrew the two screws and take out the four pistons around the perimeter of the bottom.
-turn the wheels to the side.
-in the wheel wells, Unscrew two screws on each side and release the fender liner.
-move the fender liner to the side and Unscrew one screw on each side that attach the corners to the wings.
-we release the latch in the wings (pull the corners towards you).
-open the hood.
-(before restyling) under the hood, Unscrew the screws and remove the grille. Unscrew the four screws under the radiator grille.
-(after restyling) Unscrew the four screws that secure the top.
-Unscrew the screws around the perimeter of the lower part (spun up).
-turn the wheels to the side.
-in the wheel arches, we release the fender liner (it is not necessary to remove it).
-(before restyling) under the hood, Unscrew the screws and remove the grille. Unscrew the four screws under the radiator grille.
-(after restyling) Unscrew the four screws that secure the top.
-Unscrew the screws around the perimeter of the lower part (spun up).
-turn the wheels to the side.
-in the wheel arches, we release the fender liner (it is not necessary to remove it).
Author: carsoftos777 | 20-06-2023, 23:39 | Programs for cars and diagnostics | Views: 856 | Comments: 0
Description: A program for testing the computer of BMW cars.
Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
Carly for BMW is the most powerful tool for mobile devices that can work with BMW vehicles from 1994 onwards.
-open the hood.
-under the hood, Unscrew the four screws (spun down) that secure the top.
-Unscrew the seven screws around the perimeter of the bottom (spun up).
-turn the wheels to the side.
-in the wheel wells, Unscrew four screws on each side that secure the fender liner.
- unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners towards you).
-under the hood, Unscrew the four screws (spun down) that secure the top.
-Unscrew the seven screws around the perimeter of the bottom (spun up).
-turn the wheels to the side.
-in the wheel wells, Unscrew four screws on each side that secure the fender liner.
- unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners towards you).
-under the hood take out the caps (inserted from top to bottom). Until 2005 under the grille, after 2005 above the grille.
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel wells, Unscrew the screws that secure the fender liner.
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel wells, Unscrew the screws that secure the fender liner.