How to remove front and rear bumper Acura TL (2004-2008)

-take out the two pistons that secure the top.
-Unscrew the two screws and take out the four pistons around the perimeter of the bottom.
-turn the wheels to the side.
-in the wheel wells, Unscrew two screws on each side and release the fender liner.
-move the fender liner to the side and Unscrew one screw on each side that attach the corners to the wings.
-we release the latch in the wings (pull the corners towards you).

-we release the latches under the headlights (press down and forward).

-with an assistant, pull the bumper forward (be careful not to break the wires and hoses).
-remove the connectors from the fog lights (if any).

Rear bumper

-Open the trunk lid.
-in the opening of the trunk, take out the plugs and Unscrew the two screws under them.
-from the bottom take out six caps (inserted from the bottom up).
-in the wheel wells, Unscrew two screws on each side and release the fender liner.
-move the fender liner to the side and Unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners towards you).
-we release the latches under the rear lights and in the opening of the trunk.

-with an assistant, gently pull the bumper back (be careful not to break the wires).
-remove the connectors from the parking sensors (if any).
Tags: