СarSoftos.com » How To Remove Bumpers » How to remove front and rear bumper Alfa Romeo Giulietta

How to remove front and rear bumper Alfa Romeo Giulietta

Author: carsoftos777 | 20-06-2023, 23:33 | How To Remove Bumpers | Views: 267 | Comments: 0 | Found a bug?
How to remove front and rear bumper Alfa Romeo Giulietta


-open the hood.
-under the hood, Unscrew the four screws (spun down) that secure the top.
-Unscrew the seven screws around the perimeter of the bottom (spun up).
-turn the wheels to the side.
-in the wheel wells, Unscrew four screws on each side that secure the fender liner.
- unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners towards you).

-with an assistant, pull the bumper forward (be careful not to break the wires and hoses).
-disconnect the fog lamp connectors.
-disconnect the headlight washer hoses (if any).

Rear bumper




-Open the trunk lid.
-remove the rear lights.
-Unscrew the four screws (spun up) that secure the lower part.
-in the wheel wells, Unscrew three screws on each side that secure the fender liner.
-Unscrew one screw on each side (spun up) that attach the corners to the wings.

-we release the latches in the wings, under the rear lights and in the opening of the trunk.
-with an assistant, pull the bumper back (be careful not to break the wires).
-disconnect the connectors from the license plate lighting and parking sensors (if any).
  • LIKE
  • 1

Tags:
Information
Users of Guests are not allowed to comment this publication.