How to remove front and rear bumper Alfa Romeo 159

-open the hood.
-under the hood, Unscrew the four screws that secure the top.
-Unscrew the seven screws around the perimeter of the bottom (spun up).
-turn the wheels to the side.
-in the wheel wells, Unscrew the screws that attach the fender liner to the bumper.
-Unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners towards you).
-with an assistant, pull the bumper forward (be careful not to break the wires and hoses).
-disconnect the fog lamp connectors.
-disconnect the headlight washer hoses (if any).

Rear bumper

-Open the trunk lid.
-from the trunk, Unscrew the fasteners and remove the taillights.
-under the rear lights, Unscrew one screw on each side that secure the top.
-Unscrew the four screws around the perimeter of the bottom.
-in the wheel arches, Unscrew the screws that attach the fender liner to the bumper and the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners towards you).
-with an assistant, pull the bumper back (be careful not to break the wires).
-disconnect the connectors from the license plate lighting and prktronic.
Tags: