СarSoftos.com » Materials for October 2023 year
Author: carsoftos777 | 22-10-2023, 16:38 | Programs for cars and diagnostics | Views: 1 324 | Comments: 0


The program works via OBDKey, KLLine or ELM327 adapters. To communicate with some blocks, you need to modify the adapter or use an adapter.
Data exchange with electronic units of cars manufactured by Fiat Group. Determining and erasing errors in electronic components, monitoring parameters.
  • LIKE
  • 1
How to remove the front and rear bumper of Alfa Romeo MiTo


-open the hood.
-under the hood, Unscrew the four screws (twisted from top to bottom) that secure the upper part.
-Unscrew the four screws (twisted from bottom to top) that secure the lower part of the bumper.
-turn the wheels to the side.
-in the wheel arches we unscrew three screws and one on the bottom side that secure the fender liners (no need to remove).
-move the fender liners to the side and unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the wings.
  • LIKE
  • 0


Bumper mounting diagrams. The arrows indicate screws, rivets and latches.
  • LIKE
  • 0
Author: carsoftos777 | 20-10-2023, 02:27 | Programs for cars and diagnostics | Views: 1 151 | Comments: 0
Carista 8.1 Pro Full


Description: Carista OBD2 Sees ALL blocks, errors on them, resets errors. Maybe something to configure, encode.
The program significantly increased the number of readable blocks by the engine ECU, the program allows you to read and erase the errors of the ABS.AIR BAG blocks AND NOT ONLY.
  • LIKE
  • 1
How to remove the front and rear bumper of Acura RDX (2006-2012)


-open the hood.
-under the hood, take out the pistons and Unscrew the screws that secure the upper part.
-around the perimeter of the lower part, unscrew two screws and take out seven pistons (twisted and inserted from bottom to top).
-depending on which side we will disassemble, turn the wheels to the side.
-in the wheel arches, unscrew two screws on each side and release the fender liners.
-release the latches in the wings (pull the corners toward you).
  • LIKE
  • 0
Author: carsoftos777 | 20-10-2023, 02:18 | Programs for cars and diagnostics | Views: 794 | Comments: 0
EOBD Facile 3.53.0976 Full


Description: Connect the ELM 327 OBD interface on (OBD2) your car and run the application: you can find out about engine and gearbox defects, as well as get a complete visualization of all your car data in real time.
  • LIKE
  • 0
How to remove the front and rear bumper of an Opel Antara


-under the hood, take out the pistons that secure the trim and Unscrew the two screws that secure the upper part.
-turn the wheels to the left or right, depending on which side we will disassemble first.
-in the wheel arches, Unscrew the screws that secure the fender liners.
-move the fender liners to the side and unscrew one screw on each side that secures the bumper to the wings.
  • LIKE
  • 0
Author: carsoftos777 | 20-10-2023, 02:11 | Programs for cars and diagnostics | Views: 1 092 | Comments: 0


Description: Scania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles and Scania industrial and marine engines.
  • LIKE
  • 1
How to remove the front and rear bumper of VW Sharan, SEAT Alhambra (after 2000)


-under the hood, Unscrew the four radiator grille screws (twisted from top to bottom).
-we unscrew the wheels to the left or right, depending on which side you will disassemble.
-Unscrew the screws in the wheel arches.
-Unscrew the three screws at the bottom of the bumper (twisted from bottom to top).
-with an assistant, pull the corners of the bumper to the sides and pull it forward from the guides.
-now you can disconnect the connectors from the fog lights (if any).
  • LIKE
  • 0


BimmerLink for Android is the direct link to your BMW or Mini. Using an OBD adapter you can read trouble codes or display sensor values in realtime, check the current state of the DPF in your car or register a new battery after replacement. BimmerLink even allows you to remotely control the exhaust flap or mute the Active Sound Design in your car.
  • LIKE
  • 0