СarSoftos.com » How To Remove Bumpers » How to remove the front and rear bumper AUDI A2

How to remove the front and rear bumper AUDI A2

Author: carsoftos777 | 5-02-2023, 04:10 | How To Remove Bumpers | Views: 530 | Comments: 0 | Found a bug?
How to remove the front and rear bumper AUDI A2


-open the hood and take out the caps (inserted from top to bottom) that secure the upper part of the bumper (to get the cap you need to press its central part inward until it clicks)
-Unscrew the screws at the bottom (spun up).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel wells, Unscrew the screws that secure the fender liner and lining on the wings.
-move the fender liner to the side and Unscrew the screws that attach the corners to the wings.

-with an assistant, tear off the corners from the latches and pull the bumper from the guides towards you.
-remove the connector from the parking sensors (if any).
-remove the connector from the fog lights.
-if there are headlight washers, disconnect the hoses. To prevent liquid from leaking to the ground, you need to prepare a suitable container or plug.

Rear bumper



-open the trunk lid and Unscrew the screws in the opening (spun down).
-Unscrew the screws in the wheel arches that secure the fender liner and fender liner to the bumper (in order not to remove the wheels it is more convenient to unscrew with a ratchet with a nozzle).
-move the fender liner to the side and Unscrew one screw on each side (may not be).
-Unscrew the screws around the perimeter at the bottom (spun up).
-with an assistant, we release the bumper from the latches in the wings and pull it from the guides towards ourselves.

-remove the connectors from the parking sensors (if any).
  • LIKE
  • 1

Tags:
Information
Users of Guests are not allowed to comment this publication.