СarSoftos.com » How To Remove Bumpers » How to remove front and rear bumper Alfa Romeo 166

How to remove front and rear bumper Alfa Romeo 166

Author: carsoftos777 | 26-06-2023, 18:25 | How To Remove Bumpers | Views: 265 | Comments: 0 | Found a bug?
How to remove front and rear bumper Alfa Romeo 166


-open the hood.
-(before restyling) under the hood, Unscrew the screws and remove the grille. Unscrew the four screws under the radiator grille.
-(after restyling) Unscrew the four screws that secure the top.
-Unscrew the screws around the perimeter of the lower part (spun up).
-turn the wheels to the side.
-in the wheel arches, we release the fender liner (it is not necessary to remove it).

-behind the fender liner, Unscrew three screws on each side (spun up) that secure the corners of the bumper to the wings.

-with an assistant, pull the bumper forward (be careful not to break the wires and hoses).
-disconnect the fog lamp connectors.
-disconnect the headlight washer hoses (if any).

Rear bumper




-Open the trunk lid.
-in the opening of the trunk, Unscrew the two screws.
-in the trunk, we release the side trim (you need to gain access to the inside of the wings).
-for the skins, Unscrew the screws that secure the bumper to the wings.

-Unscrew the screws around the perimeter of the lower part (spun up).
-in the wheel arches release the fender liner.
-for the fender liner, Unscrew the screws (spun up) that attach the corners to the wings.

-with an assistant, pull the bumper back (be careful not to break the wires).
-disconnect the connectors from the license plate lighting and parking sensors (if any).
  • LIKE
  • 1

Tags:
Information
Users of Guests are not allowed to comment this publication.