How to remove front and rear bumper Peugeot 308

-open the hood.
-under the hood, take out the caps and Unscrew the screws (inserted and screwed down) that secure the top.
-we release the upper part from the latches (in the places indicated by the arrows you need to press with a flat screwdriver).
-on the perimeter of the lower part, Unscrew the screws (spun up).
-depending on which side we will disassemble, turn the wheels.
-in the wheel arches release the fender liner.
-for the fender liner, Unscrew one screw on each side (spun down) that attach the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners towards you).
-pull the bumper forward (be careful not to break the wires and hoses).
-remove the connectors from the fog lights (if any).
-disconnect the washer hoses (liquid may leak).

Rear bumper

-Open the trunk lid.
-from the trunk, Unscrew the plastic nuts and remove the rear lights.
-under the rear lights take out the caps and turn the latches 90 degrees.
-Unscrew the screws and take out the caps that secure the lower part (twisted and inserted from the bottom up).

-in the wheel arches release the fender liner.
-for the fender liner, Unscrew one screw on each side that secures the corners to the wings (spun down).
-remove the bumper back (be careful not to break the wires).
-remove connectors from electrical equipment (if any).
Tags: