How to remove the front and rear bumper VW Passat B8

-open the hood.
-under the hood, Unscrew the four screws and remove the grille (the bottom is held on by latches, you need to pull it towards you).
-from the bottom, Unscrew the seven screws (spun up).
-turn the wheels to the side.
-in the wheel wells, Unscrew three screws on each side that secure the fender liner (front), release the fender liner from the bumper.

-Unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper forward (look behind the wires and hoses).
- release electrical connectors.
-disconnect the headlight washer hoses (if any, fluid may leak).

Rear bumper

-Open the trunk lid.
-open the plugs in the side panels.
-for the skins, Unscrew the plastic nuts and remove the taillights.
-in the wheel wells, Unscrew three screws on each side that secure the fender liner (rear).
-Unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-Unscrew the screws and take out the caps that secure the bottom of the bumper (twisted and inserted from the bottom up).

-we release the latch in the wings (pull the corners towards you).
-we release the clips under the rear lights.
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors (if any).
Tags: