How to remove front and rear bumper Acura RL (Honda Legend) (2005-2012)

Depending on the year of manufacture, the attachment points may differ.
-open the hood.
-under the hood take out the six caps that secure the top.

-Unscrew the two screws and take out the four pistons (twisted and inserted from the bottom up) that secure the lower part.
-depending on which side we will disassemble, turn the wheels to the side.
-in the wheel arches release the fender liner.

-for the fender liner, Unscrew one screw on each side that attach the corners to the wings.
-we release the latch in the wings (pull the corners towards you).
-we release the latches under the headlights.

-with an assistant, pull the bumper forward (be careful not to break the wires and hoses).
-remove the connectors from the fog lights (if any).
-(if any) disconnect the washer hoses (liquid may leak).

Rear bumper

-Open the trunk lid.
-Unscrew the screws in the trunk opening (depending on the year, if any)
-around the perimeter of the lower part, Unscrew the four screws and take out two pistons.
-in the wheel arches release the fender liner.
-for the fender liner, Unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners towards you).

-we release the latches under the rear lights and in the opening of the trunk.

-with an assistant, gently pull the bumper back (be careful not to break the wires).
-remove connectors from electrical equipment (if any).
Tags: