How to remove front and rear bumper Chevrolet Aveo/Sonic T300

-open the hood.
-under the hood take out the caps and Unscrew the screws that secure the top.
-turn out the wheels, depending on which side we will disassemble.
-in the wheel wells, Unscrew three screws on each side that secure the fender liner.

-Unscrew one screw on each side (spun up) that attach the corners to the wings.
-at the bottom, Unscrew the screws and take out the caps (twisted and inserted from the bottom up), remove the protection.
-under the protection, Unscrew the screws that secure the lower part.
-we release the latch in the wings (pull the corners down and towards you) and under the headlights.

-with an assistant, gently pull the bumper forward (be careful not to break the wires).
-remove the connectors from the temperature sensor and fog lights.

Rear bumper

-Open the trunk lid.
-Unscrew the screws and take out the caps in the wheel arches that secure the fender liner and mud flaps.
-for the fender liner, Unscrew the screws (spun up) that attach the corners to the wings.
-Unscrew the four screws (spun up) that secure the lower part.
-we release the latches in the wings (pull down and towards you), under the rear lights and in the opening of the trunk.

-with an assistant, gently pull the bumper back (be careful not to break the wires).
-disconnect electrical connectors (if any).
Tags: