How to remove front and rear bumper Peugeot Partner Tepee (Citroën Berlingo B9) (after 2009)

-open the hood.
-under the hood, Unscrew the screws and take out the caps (twisted and inserted from top to bottom) that secure the top.
-on the perimeter of the lower part, Unscrew the screws and take out the caps (twisted and inserted from the bottom up).

-depending on which side we will disassemble turn the wheels.
-in the wheel arches release the fender liner.
-move the fender liner to the side and Unscrew in the wings (approximately under the edges of the headlights) two screws on each side that attach the bumper to the wings.

-we release the latch in the wings (pull the corners towards you).
-pulls the bumper forward (be careful not to break the wires).
-remove connectors from electrical equipment (if any).

Rear bumper

-open the lid (doors) of the trunk.
-in the opening of the trunk, Unscrew the screws (depending on the year, the number varies).
-remove the rear lights.
-(if any) under the rear lights Unscrew one screw on each side.
-around the perimeter of the lower part, Unscrew the screws and take out the caps.
-in the wheel arches release the fender liner.
-for the fender liner, Unscrew the screws that attach the corners to the wings.

-release the latches in the wings (gently pull the corners towards you).
-carefully pull the bumper back.
Tags: