СarSoftos.com » How To Remove Bumpers » How to remove front and rear bumper BMW X6 (E71)

How to remove front and rear bumper BMW X6 (E71)

Author: carsoftos777 | 14-01-2023, 03:28 | How To Remove Bumpers | Views: 1 533 | Comments: 0 | Found a bug?
How to remove front and rear bumper BMW X6 (E71)


-open the hood.
- under the hood, between the headlights, unscrew the five screws (spun down).
-closer to the wheel arches, under the wings, remove the trim.
-under the covers, Unscrew one screw on each side.
-Unscrew the screws around the perimeter at the bottom.
-turn the wheels left or right, depending on which side you will disassemble.

-in the wheel wells, Unscrew the screws and release the fender liner.
-in the M version, Unscrew three screws on each side under the headlights.
-with an assistant, pull the bumper from the rails towards you.
-remove connectors from electrical equipment (if any).




Rear bumper




-in the wheel wells take out the caps and release the fender liner.
-take the fender liner to the side and Unscrew the screws that secure the corners of the bumper.
-on the perimeter at the bottom, Unscrew the screws.
- with an assistant, we release the latches in the wings, under the rear lights and in the trunk opening.
- Pull the bumper over.

-remove connectors from electrical equipment (if any).
  • LIKE
  • 1

Tags:
Information
Users of Guests are not allowed to comment this publication.