How to remove front and rear bumper BMW X1 (E84)

-open the hood.
- under the hood, unscrew the four screws (spun down).
-Unscrew one screw on each side behind the headlights in the wings.
-Unscrew the screws around the perimeter at the bottom.
-turn the wheels left or right, depending on which side you will disassemble.
-in the wheel wells take out the caps and release the fender liner.

-take the fender liner to the side and unscrew the screws (spun up) that secure the corners to the wings
-with an assistant, release the bumper from the latches and pull it towards you.
-remove the connector from the fog lights (if any).
-remove the connector from the parking sensors (if any).
-if there are headlight washers, disconnect the hoses.





Tags: