Navigation

Top News

Statistics

Advertisement

СarSoftos.com » Materials for February 2023 year » Page 4
How to remove front and rear bumper Peugeot 301 (Citroen C-Elysee)


-open the hood.
-under the hood, under the hood, Unscrew the screws that secure the trim and the top.
-we release the upper part from the latches.
-on the perimeter of the lower part, Unscrew the screws (spun up).
-turn the wheels to the side.
-in the wheel wells, Unscrew the screws and release the fender liner.
  • LIKE
  • 1
Author: carsoftos777 | 5-02-2023, 16:50 | How To Remove Bumpers | Views: 486 | Comments: 0
How to remove the front and rear bumper AUDI A4 B8


The bumper is removed along with the grille.
Depending on the year of manufacture and type of model, the attachment points differ slightly.
  • LIKE
  • 1
Author: carsoftos777 | 5-02-2023, 04:43 | Programs for cars and diagnostics | Views: 5 107 | Comments: 0


Description: Dealer diagnostic software for Toyota, Lexus, Scion.
  • LIKE
  • 5
How to remove front and rear bumper of Chevrolet Avalanche/Tahoe/Suburban (2006-2013)


Depending on the year of manufacture and body type, the attachment points may differ.
Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws, nuts and latches.
  • LIKE
  • 1
Author: carsoftos777 | 5-02-2023, 04:10 | How To Remove Bumpers | Views: 692 | Comments: 0
How to remove the front and rear bumper AUDI A2


-open the hood and take out the caps (inserted from top to bottom) that secure the upper part of the bumper (to get the cap you need to press its central part inward until it clicks)
-Unscrew the screws at the bottom (spun up).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel wells, Unscrew the screws that secure the fender liner and lining on the wings.
-move the fender liner to the side and Unscrew the screws that attach the corners to the wings.
  • LIKE
  • 1


Description:
– New versions of Porsche Piwis Tester (41.400 + 38.250);
— Full FAP diagnostic protocol;
— Complete electronic circuits of Porsche cars;
- Reading, decoding, deleting fault codes;
— Reset service intervals;
— View and save the flow of current data;
- View freeze frames of faults;
— Tests of actuators and electronic units;
— Guided troubleshooting for 2021 (Online and Offline);
  • LIKE
  • 2
Author: carsoftos777 | 3-02-2023, 04:15 | Programs for cars and diagnostics | Views: 1 980 | Comments: 0
BimmerCode 4.11.1-10917 for BMW and Mini Full


BimmerCode 4.11.1-10917 allows you to code the control units on your BMW or Mini to unlock hidden features and customize your vehicle to your liking.
  • LIKE
  • 2
How to remove front and rear bumper of Chevrolet Spark (Matiz)/ Daewoo Matiz (2005-2009)


-open the hood.
-under the hood take out four pistons.
-on the perimeter of the lower part we take out the caps.
-turn the wheels to the left or right side, depending on which side we will disassemble first.
  • LIKE
  • 1


Description: The original catalog of spare parts for Porsche cars.
  • LIKE
  • 1
Author: carsoftos777 | 2-02-2023, 04:37 | How To Remove Bumpers | Views: 399 | Comments: 0
How to remove front and rear bumper BMW 5-series E34


-remove the side moldings. The front half of the molding is snap-on, you need to pry it off with a screwdriver and pull it towards you. The side half of the molding is hooked, it just pulls together.
-under the moldings, Unscrew the four nuts, two on each side.
-in the wheel arches, you need to pry off the edges of the fender liner and pull them out over the edges of the bumper.
-remove the connectors from the fog lights (if any)
-remove the temperature sensor (in the bumper grille closer to the left side).
  • LIKE
  • 1