How to remove front and rear bumper of Chevrolet Rezzo (Daewoo Tacuma)

-open the hood.
-under the hood, Unscrew the screws, release the latches and remove the grille.
-on the perimeter of the lower part, Unscrew the screws that secure the protection.

-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel wells, Unscrew the screws and release the fender liner.

-for the fender liner, Unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-Unscrew two screws and one nut from each side of the Chevrolet Rezzo headlight attachment scheme and remove the headlights.
-in the openings of the headlights, Unscrew four nuts on each side that secure the bumper amplifier.
-pulls the bumper forward along with the amplifier (be careful not to break the wires).
-remove connectors from electrical equipment (if any).

Rear bumper

-Open the trunk lid.
-in the opening of the trunk, Unscrew the six screws.
- we unscrew the screws in the wheel arches that attach the fender liner and mudguards to the bumper (in order not to remove the wheels, you need to use a ratchet with a nozzle).
-for the fender liner, Unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-at the bottom, take out the four pistons (inserted from the bottom up).
-open the hatches in the side trims of the trunk.
-in the openings behind the hatches, Unscrew the bolts (spun down).
-remove the bumper back (be careful not to break the wires).
-remove connectors from electrical equipment (if any).
Tags: