-turn the wheels to the left or right side, depending on which side we will disassemble first.
-unscrew the screws in the wheel arches that secure the mudguards.
-move the mudguards to the side and unscrew one screw on each side (the screw heads are facing the engine). It is worth paying attention to these screws, as they often get stuck and the brackets turn in the plastic.
- pull out the clips around the perimeter at the bottom (inserted from bottom to top).
- with an assistant, release the corners from the latches in the fenders and remove the bumper from the guides towards you.
- remove the connector from the fog lights (if any).
- if there are headlight washers, disconnect the hoses (to prevent the liquid from leaking onto the ground, you should prepare a special container).
Rear bumper
-open the trunk lid.
-pull out the pins in the opening (inserted from top to bottom).
-unscrew the screws in the wheel arches (in order not to remove the wheels, it is more convenient to twist with a ratchet with a nozzle).
-unscrew the screws at the bottom (screwed from bottom to top).
-with an assistant, release the latches in the fenders.
- remove the bumper from the guides towards you.

- 1
Tags: