-open the hood and unscrew the two screws and pull out the two pins that secure the radiator grille (screwed from top to bottom).
-unscrew the wheels to the left or right, depending on which side you will disassemble.
-in the wheel arches, unscrew the screws that secure the fender liners to the bumper.
-move the fender liners to the side and unscrew two screws on each side that secure the bumper to the fenders.
- remove the side decorative grilles (fastened with latches).
- unscrew one screw on each side under the decorative grilles.
- pull out the pins at the bottom and unscrew the screws (inserted and screwed from the bottom up).
- pull the bumper forward from the guides.
- remove the connectors from the fog lights (if any).
- remove the connector from the parking sensors (if any).
- if there are headlight washers, disconnect the hose and plug it with a plug so that liquid does not leak out of the tank.
Rear bumper
-in the trunk, remove the side trims (you need to get access to the back of the taillights).
-under the trims, unscrew the nuts and remove the taillights.
-unscrew the screws under the taillights.
-in the wheel arches, unscrew the screws that secure the mudguards (in order not to remove the wheels, it is more convenient to unscrew with a ratchet with a nozzle).
-behind the mudguards, unscrew one screw on each side that secure the corners to the fenders.
-at the bottom, pull out the pins (inserted from bottom to top).
-with an assistant, pull the bumper off the guides towards you.
-remove the connector from the parking sensor (if any).

- 1
Tags: