How to remove the front and rear bumper of a Skoda Roomster

Depending on the year of manufacture and model variant, the mounting locations may vary slightly.

-open the hood, unscrew the two screws and take out the two pistons (twisted from top to bottom).
-near the fog lights, remove the decorative grilles (attached with latches).
-Under the grilles, unscrew one screw on each side.
-Unscrew the screws and pull out the caps around the perimeter at the bottom of the bumper (twisted from bottom to top).
-we unscrew the wheels to the left or right, depending on which side you will disassemble first.
-in the wheel arches, Unscrew the screws that secure the fender liners.

-move the fender liners to the side and unscrew two screws in the wings on each side (twisted from top to bottom) that secure the corners to the wings.
-pull the bumper towards you.
-remove the connector from the parking sensors (if equipped).
-if there are fog lights, remove the connector.
- if there are headlight washers, disconnect the hose and plug it with a plug so that liquid does not leak out of the reservoir.

Rear bumper

Depending on the year of manufacture and model variant, the mounting locations may vary slightly.

-open the trunk lid and unscrew one screw in the opening on each side under the rear lights.
-take out the caps at the bottom (inserted from bottom to top).
-unscrew the screws in the wheel arches (in order not to remove the wheels, it is more convenient to unscrew them with a ratchet with an attachment).

-move the fender liners to the side and take out one piston on each side in the corners (inserted from bottom to top).
-with an assistant, pull the bumper off the guides towards you.
-remove the connector from the parking sensors (if equipped).
Tags: