Depending on the year of manufacture and model variant, the mounting locations may vary slightly.
-open the hood and unscrew one screw on each side near the headlights (twisted from top to bottom).
-we unscrew the wheels to the left or right, depending on which side you will disassemble.
-in the wheel arches, Unscrew the screws that secure the fender liners to the bumper.
-move the fender liners to the side and Unscrew one screw on each side.
-at the bottom, take out the pistons and unscrew the screws (inserted from bottom to top).
-pull the bumper forward from the guides.
-remove the connectors from the fog lights (if any).
-remove the connector from the parking sensors (if equipped).
Rear bumper
The bumper is removed along with the mudguards.
-in the trunk, remove the side trims (you need to gain access to the back of the rear lights).
-under the casings, unscrew the nuts and remove the rear lights.
-Unscrew the screws under the rear lights.
-unscrew the screws and pull out the pistons at the bottom (twisted from bottom to top).
-Unscrew the screws in the wheel arches.
-at the bottom we take out the caps (inserted from bottom to top).
-with an assistant, pull the bumper off the guides towards you.
-remove the connector from the parking sensors (if equipped).
- 1
Tags: