Depending on the year of manufacture and model variant, the mounting locations may vary slightly.
The bumper is removed along with the radiator grille.
-under the hood, Unscrew the two screws (twisted from top to bottom) that secure the radiator grille.
-unscrew the screws and pull out the caps along the perimeter at the bottom (inserted and twisted from bottom to top).
-we unscrew the wheels to the left or right, depending on which side you will disassemble first.
-in the wheel arches, Unscrew the screws that secure the fender liners.
-move the fender liners to the side and Unscrew one screw on each side (twisted from top to bottom) that secure the corners to the wings.
-with an assistant, pull the edges to the sides and pull the bumper off the guides towards you.
-remove the connector from the parking sensors (if equipped).
-remove the connector from the fog lights.
- if there are headlight washers, disconnect the hose and plug it with a plug so that liquid does not leak out of the reservoir.
Rear bumper
Depending on the year of manufacture and model variant, the mounting locations may vary slightly.
-open the trunk lid and remove the hatches in the side trims (you need to gain access to the back of the rear lights).
-under the hatches we take out the plugs, unscrew the screws and remove the rear lights by moving towards ourselves.
-under the rear lights, Unscrew two screws on each side (twisted from top to bottom).
-unscrew the screws in the wheel arches that secure the fender liners (in order not to remove the wheels, it is more convenient to unscrew them with a ratchet with an attachment).
-move the fender liners to the side and unscrew one screw on each side (twisted from bottom to top).
-Unscrew the screws around the perimeter at the bottom (twisted from bottom to top).
-with an assistant, tear off the corners from the latches and pull the bumper off the guides towards you.
-remove the connector from the parking sensors (if equipped).

- 1
Tags: