-remove the side moldings. The front half of the molding is snap-on, you need to pry it off with a screwdriver and pull it towards you. The side half of the molding is hooked, it just pulls together.
-under the moldings, Unscrew the four nuts, two on each side.
-in the wheel arches, you need to pry off the edges of the fender liner and pull them out over the edges of the bumper.
-remove the connectors from the fog lights (if any)
-remove the temperature sensor (in the bumper grille closer to the left side).

More details

How to remove front and rear bumper Peugeot 3008

Author: carsoftos777 | 2-02-2023, 04:35 | How To Remove Bumpers | Views: 1 297 | Comments: 0

-open the hood.
-under the hood, under the hood, Unscrew the screws and take out the caps (twisted and inserted from top to bottom).
-we release the upper part from the latches.
-on the perimeter of the lower part, Unscrew the screws (spun up).
-turn the wheels to the side.

More details

How to remove front and rear bumper Chevrolet Camaro (2009-2015)

Author: carsoftos777 | 30-01-2023, 04:25 | How To Remove Bumpers | Views: 565 | Comments: 0

-open the hood.
-under the hood take out six caps and Unscrew the two screws that secure the top.
-turn out the wheels, depending on which side we will disassemble.
-in the wheel wells, Unscrew three screws on each side that secure the fender liner.
-remove the fender liner to the side and Unscrew two screws on each side (one screwed from the bottom up and one screwed from the engine side).

More details

How to remove front and rear bumper Peugeot 806 (Fiat Ulysse, Citroën Evasion, Lancia Zeta)

Author: carsoftos777 | 30-01-2023, 04:22 | How To Remove Bumpers | Views: 702 | Comments: 0

-open the hood.
-under the hood, Unscrew the screws, release the latches and remove the grille.
-release the latches and pull out the direction indicators.
-Unscrew three screws on each side and remove the headlights.

More details

How to remove the front and rear bumper of the BMW 5-series E60 (E61)

Author: carsoftos777 | 29-01-2023, 23:18 | How To Remove Bumpers | Views: 550 | Comments: 0

-unscrew the wheels left or right, depending on which side you will unscrew first
-in the wheel wells, Unscrew the screws that secure the fender liner to the bumper.
-under the hood, remove the seal, and Unscrew the bolts under it that secure the upper part of the bumper.
-remove the lower grille and fog lamp trim.
-under the gratings, Unscrew the four screws (spun up)
-(in some modifications) we move the edges of the fender liner to the side and unscrew two bolts on each side that attach the bumper to the wings (twisted from the bottom up).

More details

How to remove front and rear bumper Peugeot Boxer (Citroën Jumper, Fiat Ducato) (1994-2006)

Author: carsoftos777 | 29-01-2023, 23:13 | How To Remove Bumpers | Views: 724 | Comments: 0

Depending on the year of manufacture, the attachment points differ slightly.
Below are the wiring diagrams for the bumpers. The arrows indicate the location of the screws. Bumpers are removed very easily, and there is not much to describe here. It is more difficult to unscrew the screws than to find them.

More details

How to remove the front and rear bumper AUDI A5

Author: carsoftos777 | 29-01-2023, 23:10 | How To Remove Bumpers | Views: 711 | Comments: 0

The bumper is removed along with the grille.
Depending on the year of manufacture and type of model, the attachment points differ slightly.

More details

How to remove the front and rear bumper AUDI Q5

Author: carsoftos777 | 29-01-2023, 03:41 | How To Remove Bumpers | Views: 733 | Comments: 0

The bumper is removed along with the grille.
Depending on the year of manufacture and type of model, the attachment points differ slightly.

More details

How to remove the front and rear bumper AUDI 80 B4

Author: carsoftos777 | 29-01-2023, 03:38 | How To Remove Bumpers | Views: 600 | Comments: 0

-in the center of the bumper at the very bottom, unscrew the bolt (under the curly screwdriver)
-along the edges of the front part of the bumper, remove the decorative grilles (if any) and unscrew the two bolts with a hex head (usually 6mm), they are twisted from the bottom up.
-pull off the edges of the bumper from the side locks (pull the edge of the bumper down and towards you)
- now you can disconnect the connectors from the fog lights and direction indicators (if any)

More details

How to remove front and rear bumper BMW X3 (E83)

Author: carsoftos777 | 29-01-2023, 00:58 | How To Remove Bumpers | Views: 667 | Comments: 0

-if there are headlight washers, take out the nozzles and remove the covers.
-open the hood.
- under the hood, unscrew the four screws (spun down) and remove the trim.
-under the trim, Unscrew the four screws (spun down) that secure the top.
-remove the decorative trims in the opening of the fog lights.
-Unscrew the screws behind the pads.

More details

Navigation

Top News

Statistics

Advertisement

Аrchives

Votes