The bumper is removed together with the grille (beard).

-under the hood, Unscrew the upper bolts of the grille and bumper.
-at the very bottom of the bumper along the entire length, Unscrew the screws securing the engine protection and fender liner.
-Unscrew the wheels left or right, depending on which side of the bumper will be unscrewed first.
-Unscrew the screws (usually under the asterisk) securing the fender liner to the bumper.

More details

How to remove the front and rear bumper of the BMW 7-series E65 (E66)

Author: carsoftos777 | 7-04-2023, 14:12 | How To Remove Bumpers | Views: 547 | Comments: 0

-unscrew the wheels left or right, depending on which side you will unscrew first
-in the wheel wells, Unscrew the bolts and remove the latches that secure the fender liner to the bumper.
-under the hood, Unscrew two screws on each side.
-vyschelkivaem license plate frame (central molding), under it, Unscrew the two screws.
-if you have parking sensors, click out the side moldings and remove the connectors from the sensors.

More details

How to remove front and rear bumper BMW 3-series E46

Author: carsoftos777 | 7-04-2023, 14:05 | How To Remove Bumpers | Views: 539 | Comments: 0

-Unscrew the wheels left or right, depending on which side you will unscrew first, and in the wheel arches, Unscrew the screws that attach the fender liner to the bumper.
-at the bottom in the middle, Unscrew the bolt (arrowed).
-in the openings for the fog lights, through the special holes, Unscrew one bolt on each side that attach the bumper amplifier to the shock absorbers (spun up).
-pull the edges of the bumper towards you and pull it off the guides (it's more convenient to do this with an assistant).

More details

How to remove the front and rear bumper Cadillac Escalade GMT800 (2002-2006)

Author: carsoftos777 | 7-04-2023, 14:02 | How To Remove Bumpers | Views: 4 600 | Comments: 0

-open the hood.
-under the hood take out six caps that secure the trim over the grille.

More details

How to remove front and rear bumper Alfa Romeo 145 (146)

Author: carsoftos777 | 7-04-2023, 13:40 | How To Remove Bumpers | Views: 479 | Comments: 0

-open the hood.
-under the hood take out the caps and remove the trim over the grille.

More details

How to remove the front and rear bumper AUDI A8 D3

Author: carsoftos777 | 7-04-2023, 13:17 | How To Remove Bumpers | Views: 478 | Comments: 0

The bumper is removed together with the grille (beard).

-under the hood, Unscrew the upper bolts that secure the grille and the upper part of the bumper to the body.
-at the very bottom of the bumper along the entire length we take out the caps that secure the engine protection and fender liner.
-Unscrew the wheels left or right, depending on which side of the bumper will be unscrewed first.
-in the wheel arches, Unscrew the screws and take out the caps that attach the fender liner to the bumper.
-Now the hardest part, you need to unscrew the three nuts on each side that attach the bumper to the fenders. You will need a head for 10 with an extension cord (about 30 cm) and a ratchet. Move the fender liner to the side and unscrew the nuts. In some models, depending on the engine, there may be a washer reservoir or a charcoal filter under the wing, which make it difficult to access the nuts.

More details

How to remove the front and rear bumper AUDI A8 D4

Author: carsoftos777 | 7-04-2023, 13:06 | How To Remove Bumpers | Views: 613 | Comments: 0

The bumper is removed along with the grille.
Depending on the year of manufacture and type of model, the attachment points differ slightly.

-under the hood take out the caps and remove the trim over the grille.
-Unscrew the screws under the trim (spun down).
-Unscrew the screws around the perimeter at the bottom (spun up).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel wells, Unscrew the screws and take out the caps that secure the fender liner.

More details

How to remove front and rear bumper Volvo S60, XC60, XC70 (after 2010)

Author: carsoftos777 | 7-04-2023, 13:00 | How To Remove Bumpers | Views: 817 | Comments: 0

-open the hood.
-under the hood, remove the trim (if any).
-take out nine caps (inserted from top to bottom) that secure the top.
-turn the wheels to the side.
-wheel arches take out five caps (maybe screws) on each side and one screw that attach the corners to the wings.
-at the bottom, take out the three pistons (inserted from the bottom up).

More details

How to remove front and rear bumper Peugeot 308

Author: carsoftos777 | 31-03-2023, 16:26 | How To Remove Bumpers | Views: 2 114 | Comments: 0

-open the hood.
-under the hood, take out the caps and Unscrew the screws (inserted and screwed down) that secure the top.
-we release the upper part from the latches (in the places indicated by the arrows you need to press with a flat screwdriver).
-on the perimeter of the lower part, Unscrew the screws (spun up).
-depending on which side we will disassemble, turn the wheels.
-in the wheel arches release the fender liner.
-for the fender liner, Unscrew one screw on each side (spun down) that attach the corners of the bumper to the wings.

More details

How to remove front and rear bumper Peugeot 5008

Author: carsoftos777 | 31-03-2023, 16:22 | How To Remove Bumpers | Views: 959 | Comments: 0

-open the hood.
-under the hood, Unscrew the two screws and take out the two pistons that secure the top.
-around the perimeter of the lower part, Unscrew the eight screws that secure the lower part.

More details

Navigation

Top News

Statistics

Advertisement

Аrchives

Votes