Navigation

Top News

Statistics

Advertisement

How to remove the front and rear bumper Cadillac SRX (2004-2010)


Depending on the year of manufacture, the attachment points may differ.

-open the hood.
-under the hood take out six caps that secure the grille and the upper part of the bumper.
  • LIKE
  • 2
Author: carsoftos777 | 5-06-2023, 12:27 | How To Remove Bumpers | Views: 382 | Comments: 0
How to remove front and rear bumper Peugeot 306


-Unscrew the screws that secure the lower part (spun up).
-from the engine compartment (engine side) Unscrew the four nuts that secure the bumper amplifier to the spars.
  • LIKE
  • 2
How to remove the front and rear bumper Cadillac SRX (2009-2016)


Depending on the year of manufacture, the attachment points may differ.

-open the hood.
-under the hood take out the caps and remove the trim.
-under the trim, Unscrew the six screws and take out the two pistons that secure the grille and the top.
  • LIKE
  • 2


Bumper mounts. The arrows indicate the screws, caps and latches.
Depending on the year of manufacture, the attachment points differ slightly.
  • LIKE
  • 2
How to remove front and rear bumper Acura MDX (2006-2013)


open the hood.
-under the hood take out nine caps and remove the trim over the grille.
-under the trim, Unscrew the two screws and take out the two pistons.
-on the perimeter of the lower part, Unscrew the two screws and take out nine caps (twisted and inserted from the bottom up).
-depending on which side we will disassemble, turn the wheels to the side.
-in the wheel wells, Unscrew the screws and release the fender liner.
  • LIKE
  • 2
How to remove front and rear bumper Peugeot Expert 3 (Citroën Jumpy, Fiat Scudo) (2006-2016)


-open the hood.
-under the hood take out the four pistons and remove the grille up.
-take out the caps under the grille that secure the top.
-on the perimeter of the lower part, Unscrew the screws and release the clamps.
-depending on which side we will disassemble turn the wheels.
  • LIKE
  • 2
Author: carsoftos777 | 28-05-2023, 03:21 | How To Remove Bumpers | Views: 834 | Comments: 0


-open the hood.
-under the hood, Unscrew the four screws and remove the grille (the bottom is held on by latches, you need to pull it towards you).
-from the bottom, Unscrew the seven screws (spun up).
-turn the wheels to the side.
-in the wheel wells, Unscrew three screws on each side that secure the fender liner (front), release the fender liner from the bumper.
  • LIKE
  • 2
How to remove front and rear bumper Acura RL (Honda Legend) (2005-2012)


Depending on the year of manufacture, the attachment points may differ.
-open the hood.
-under the hood take out the six caps that secure the top.
  • LIKE
  • 2
Author: carsoftos777 | 16-05-2023, 16:29 | How To Remove Bumpers | Views: 696 | Comments: 0
How to remove front and rear bumper Skoda Superb 1 (B5)


Depending on the year of manufacture and model variant, the attachment points may differ slightly.

-open the hood, Unscrew the three screws opposite the radiator (spun down).
-Unscrew the screws around the perimeter at the bottom of the bumper (spun up).
-Unscrew the wheels to the left or right side, depending on which side you will disassemble first.
-in the wheel wells, Unscrew the screws that secure the fender liner.
-move the fender liner to the side and Unscrew one screw on each side (spun up) that attach the corners to the wings.
  • LIKE
  • 2


Depending on the year of manufacture, the attachment points may differ.
Front bumper
-open the hood.
-under the hood, Unscrew the four screws and take out the two pistons that secure the trim over the grille.
-we release the hood latch cable.
-depending on which side we will disassemble, turn the wheels.
-we release the lining of the wings (hold on the latches, starting from the bottom, pull towards you).
-in the wheel wells, take out the caps and release the fender liner (no need to remove).
  • LIKE
  • 3