Navigation

Top News

  • Pre-installed ODIS Service 25.0.3 and ODIS Engineering 19 [2025] Full
  • JLR SDD 168 + Files Offline [06.2025] Full
  • FSC Tools 2.18 Full
  • OBDeleven 0.101.0 Full
  • PyClip 3 android15_v0.02.24 (1023224) mod Renault Car Diagnostics
  • Techstream v18.00.008 Full
  • AlfaOBD 2.4.4.0 Full
  • E OBD2 Facile 3.80.1127 Full
  • ADACT firmware for gasoline BMWs equipped with Siemens and Bosch ECUs.
  • Obd Mary 1.281 Full

    • Statistics

    Advertisement

    СarSoftos.com » How To Remove Bumpers » Page 25

    How to remove the front and rear bumper of Acura TSX (2008-2014)

    Author: carsoftos777 | 17-06-2024, 20:12 | How To Remove Bumpers | Views: 163 | Comments: 0
    How to remove the front and rear bumper of Acura TSX (2008-2014)


    -open the hood.
    -under the hood we take out the eight pins that secure the trim above the radiator grille and the upper part.
    - along the perimeter of the lower part we take out twelve pistons (inserted from bottom to top).
    • LIKE
    • 1
    More details

    How to remove the front and rear bumper of a Chevrolet HHR

    Author: carsoftos777 | 17-06-2024, 18:24 | How To Remove Bumpers | Views: 159 | Comments: 0
    How to remove the front and rear bumper of a Chevrolet HHR


    -open the hood.
    -in the opening between the headlights, Unscrew the four screws.
    -turn the wheels to the left or right, depending on which side we will disassemble first.
    • LIKE
    • 1
    More details

    How to remove the front and rear bumper of a Skoda Roomster

    Author: carsoftos777 | 17-06-2024, 17:29 | How To Remove Bumpers | Views: 195 | Comments: 0
    How to remove the front and rear bumper of a Skoda Roomster


    Depending on the year of manufacture and model variant, the mounting locations may vary slightly.

    -open the hood, unscrew the two screws and take out the two pistons (twisted from top to bottom).
    -near the fog lights, remove the decorative grilles (attached with latches).
    -Under the grilles, unscrew one screw on each side.
    -Unscrew the screws and pull out the caps around the perimeter at the bottom of the bumper (twisted from bottom to top).
    -we unscrew the wheels to the left or right, depending on which side you will disassemble first.
    -in the wheel arches, Unscrew the screws that secure the fender liners.
    • LIKE
    • 1
    More details

    How to remove the front and rear bumper of Peugeot Bipper (Citroën Nemo, Fiat Fiorino 3/Qubo)

    Author: carsoftos777 | 17-06-2024, 01:14 | How To Remove Bumpers | Views: 174 | Comments: 0
    How to remove the front and rear bumper of Peugeot Bipper (Citroën Nemo, Fiat Fiorino 3/Qubo)


    -open the hood.
    -under the hood, Unscrew the screws that secure the upper part.
    -Unscrew the screws along the perimeter of the lower part.
    -depending on which side we will disassemble, we unscrew the wheels.
    -in the wheel arches, unscrew the screws and release the fender liners.
    • LIKE
    • 1
    More details

    How to remove the front and rear bumper of VW Tiguan (2007-2016)

    Author: carsoftos777 | 16-06-2024, 01:27 | How To Remove Bumpers | Views: 197 | Comments: 0
    How to remove the front and rear bumper of VW Tiguan (2007-2016)


    Depending on the year of manufacture and type of model, the mounting locations may differ.
    -turn the wheels to the side depending on which side you will disassemble first.
    -in the wheel arches, remove the screws that secure the fender liners.
    -in the wheel arches, disconnect the linings at the attachment points with the bumper.
    -Unscrew the screws behind the linings.
    -Unscrew the four screws at the very bottom of the front part (twisted from bottom to top).
    -Unscrew two screws under the hood at the corners of the radiator grille (there may be three).
    -with an assistant, pull the edges of the bumper to the sides, tearing it off the latches, and pull it forward from the guides.
    • LIKE
    • 1
    More details

    How to remove the front and rear bumper of a Suzuki SX4 (2006-2013)

    Author: carsoftos777 | 15-06-2024, 18:11 | How To Remove Bumpers | Views: 154 | Comments: 0
    How to remove the front and rear bumper of a Suzuki SX4 (2006-2013)


    -open the hood.
    -under the hood, Unscrew the four screws that secure the upper part of the bumper.
    -unscrew eight screws along the perimeter of the lower part (twisted from bottom to top).
    -turn the wheels to the side.
    -in the wheel arches we release the fender liners.
    -move the fender liners to the side and unscrew one screw on each side that secures the corners of the bumper to the wings.
    • LIKE
    • 1
    More details

    How to remove the front and rear bumper of VW Polo (2001-2009)

    Author: carsoftos777 | 15-06-2024, 02:10 | How To Remove Bumpers | Views: 209 | Comments: 0
    How to remove the front and rear bumper of VW Polo (2001-2009)


    Depending on the year of manufacture, the mounting locations may differ.
    -under the hood, Unscrew the two screws and take out the two pistons that secure the radiator grille.
    -release the grille from the lower latches and remove it upwards.
    -Unscrew the three screws under the radiator grille.
    -remove the side decorative grilles (held on by latches) and unscrew one screw under them on each side.
    • LIKE
    • 1
    More details

    How to remove the front and rear bumper of VW Tiguan II (2016)

    Author: carsoftos777 | 2-05-2024, 20:48 | How To Remove Bumpers | Views: 225 | Comments: 0


    Depending on the year of manufacture and body type, the attachment points may vary slightly.
    -open the hood.
    -under the hood, Unscrew the four screws that secure the radiator grille (the grille does not need to be removed).
    -from the bottom side, unscrew the twelve screws (twisted from bottom to top).
    -turn the wheels to the side.
    -in the wheel arches, Unscrew the screws that secure the fender liners.
    -we release the fender linings from the bumper (they are held on by latches, we pull them towards ourselves).
    -in the wheel arches, unscrew the screws that secure the sides of the bumper to the wings (twisted from bottom to top).
    -release the latches in the wings (pull the corners of the bumper towards you).
    • LIKE
    • 1
    More details

    How to remove the front and rear bumper of a SEAT Altea

    Author: carsoftos777 | 2-05-2024, 02:36 | How To Remove Bumpers | Views: 263 | Comments: 0
    How to remove the front and rear bumper of a SEAT Altea


    Depending on the year of manufacture and model variant, the mounting locations may vary slightly.

    -open the hood and Unscrew the four screws (twisted from top to bottom).
    -Unscrew one screw on each side along the edges of the lower radiator grille (if any).
    -Unscrew the eight screws around the perimeter at the bottom (twisted from bottom to top).
    -we unscrew the wheels to the left or right, depending on which side you will disassemble first.
    • LIKE
    • 1
    More details

    How to remove the front and rear bumper of a Suzuki SX4 (after 2013)

    Author: carsoftos777 | 26-04-2024, 02:38 | How To Remove Bumpers | Views: 217 | Comments: 0
    How to remove the front and rear bumper of a Suzuki SX4 (after 2013)


    Below are the bumper mounting diagrams. The arrows indicate the locations of the screws and pistons.
    • LIKE
    • 2
    More details
    ← 1 ... 21 22 23 24 25 26 27 28 29 ... 45 →