How to remove the front and rear bumper of a Suzuki SX4 (2006-2013)

-open the hood.
-under the hood, Unscrew the four screws that secure the upper part of the bumper.
-unscrew eight screws along the perimeter of the lower part (twisted from bottom to top).
-turn the wheels to the side.
-in the wheel arches we release the fender liners.
-move the fender liners to the side and unscrew one screw on each side that secures the corners of the bumper to the wings.

-release the latches in the wings (pull the corners toward you).
-with an assistant, carefully pull the bumper forward (make sure not to break the wires).
-remove the connectors from the electrical equipment (if any).

Rear bumper

-open the trunk lid.
-in the corners of the trunk opening, Unscrew two screws.
-at the bottom, unscrew the two screws and take out the two pistons.
-in the wheel arches we take out three pistons on each side and release the fender liners.
-Unscrew the screws that secure the corners of the bumper to the wings.

-release the latches in the wings (pull the corners of the bumper towards you) and under the rear lights.
- with an assistant, carefully pull the bumper back.
- disconnect the connectors of the electrical equipment (if any).
Tags: