How to remove the front and rear bumper of Peugeot Bipper (Citroën Nemo, Fiat Fiorino 3/Qubo)

-open the hood.
-under the hood, Unscrew the screws that secure the upper part.
-Unscrew the screws along the perimeter of the lower part.
-depending on which side we will disassemble, we unscrew the wheels.
-in the wheel arches, unscrew the screws and release the fender liners.

-behind the fender liners, Unscrew the screws that secure the corners to the wings.
-release the latches in the wings (pull the corners toward you).
-pull the bumper forward (make sure not to break the wires).
-remove the connectors from the electrical equipment (if any).





-open the trunk lid.
-in the trunk opening, Unscrew the four screws.
-Unscrew two screws on each side and remove the rear lights.
-under the rear lights, Unscrew two screws on each side.
-Unscrew the screws that secure the lower part.
-in the wheel arches, unscrew the screws and release the fender liners.

-behind the fender liners, Unscrew one screw on each side that secures the corners to the wings.
-with an assistant, release the latches in the wings (pull the corners toward you) and carefully pull the bumper back, making sure not to break the wires.
- disconnect the connectors of the electrical equipment (if any).
Tags: