How to remove the front and rear bumper of a Peugeot 405

-Unscrew the screws along the perimeter of the lower part.
-depending on which side we will disassemble, turn the wheels out.
-in the wheel arches we release the fender liners (you don’t have to remove them completely).
-behind the fender liners, Unscrew one screw on each side that secures the corners of the bumper to the wings.

-then there are two options. Either we try to rip the bumper off the amplifier (it is held very securely by the latches), or under the headlights, from the side of the engine compartment, we unscrew the nuts securing the amplifier to the body (it is difficult to get to).
-pull the bumper forward (make sure not to tear the wires and hoses).
-remove the connectors from the fog lights (if any).
-(if any) disconnect the washer hoses (liquid may leak).

Rear bumper

-open the trunk lid.
-(if any) unscrew the screws from the trunk.
-in the wheel arches, unscrew the screws and release the fender liners.
-behind the fender liners, Unscrew one screw on each side that secures the corners of the bumper to the wings.

-from the bottom side, unscrew the screws that secure the bumper amplifier to the body.
-with an assistant, carefully (making sure not to break the wires) pull the bumper back.
-remove the connectors from the electrical equipment (if any).
Tags: