Navigation

Top News

Statistics

Advertisement

How to remove front and rear bumper SEAT Ibiza MK2 (1993-2002)


Depending on the year of manufacture and model variant, the mounting locations differ.

-unscrew the four screws under the hood.
-remove the upper trims and lower plugs (you need to carefully pry the edge with a screwdriver and tear it off the latches).
-unscrew the screws under the trims and plugs.
-unscrew the three screws at the bottom of the bumper (screwed from the bottom up).
  • LIKE
  • 1
Author: carsoftos777 | 30-01-2025, 23:28 | How To Remove Bumpers | Views: 59 | Comments: 0
How to Remove Front and Rear Bumper Toyota FJ Cruiser


-Unscrew the screws under the hood, pull out the clips and remove the radiator grille.
-Unscrew the five screws under the radiator grille (screwed from top to bottom).
-Unscrew the screws along the perimeter of the lower part (screwed from bottom to top).
-Turn the wheels to the left or right side, depending on which side we will disassemble first.
  • LIKE
  • 1
How to remove the front and rear bumper Skoda Octavia 2 (2004–2013)


Depending on the year of manufacture and model variant, the mounting locations may differ slightly.

-open the hood and unscrew the headlight mounting nuts.
-release the clips (in the corners of the headlights, near the radiator) and pull out the headlights forward.
-unscrew the screws under the headlights (screwed from top to bottom).
-unscrew the screws opposite the radiator (screwed from top to bottom).
-unscrew the wheels to the left or right, depending on which side you will disassemble.
  • LIKE
  • 1
Author: carsoftos777 | 30-01-2025, 03:07 | How To Remove Bumpers | Views: 139 | Comments: 0
How to remove the front and rear bumper Peugeot 108


Below are the bumper mounting diagrams. The arrows indicate the locations of the screws, pins and latches.
  • LIKE
  • 1
How to Remove Front and Rear Bumper Saab 9-5 (1997-2001)


-open the hood.
-release the latches under the hood and remove the radiator grille.
-remove the turn signals and unscrew the nuts behind them.
-unscrew the four screws that secure the bumper to the amplifier.
-unscrew the screws around the perimeter of the lower part (screwed from the bottom up), which secure the protection and fender liners.
  • LIKE
  • 1
Author: carsoftos777 | 25-01-2025, 03:17 | How To Remove Bumpers | Views: 78 | Comments: 0


-open the hood.
-under the hood, unscrew the screws that secure the radiator grille.
-from the bottom, unscrew the screws (screwed from the bottom up) that secure the lower part of the bumper.
-turn the wheels to the side.
-pull out the pins in the wheel arches and release the fender liners (front part).
  • LIKE
  • 1
Author: carsoftos777 | 23-01-2025, 02:26 | How To Remove Bumpers | Views: 28 | Comments: 0
How to remove front and rear bumper Volvo 440-460


Depending on the year of manufacture and body type, the mounting locations may differ.
Below are bumper mounting diagrams. The arrows indicate the locations of the screws and nuts.
  • LIKE
  • 1
How to Remove Front and Rear Bumper Toyota Yaris (2005-2011)


-turn the wheels to the left or right side, depending on which side we will disassemble first.
-unscrew the screws in the wheel arches and take out the pins that secure the fender liners to the bumper.
-move the fender liners to the side and unscrew one screw on each side (screwed from the bottom up), which secure the corners to the fenders.
-under the hood, pull out the pins (inserted from top to bottom), which secure the upper part.
-unscrew the screws along the perimeter of the lower part (screwed from bottom to top).
  • LIKE
  • 1
Author: carsoftos777 | 23-01-2025, 01:44 | How To Remove Bumpers | Views: 36 | Comments: 0
How to remove front and rear bumper Toyota Previa


-under the hood, unscrew the screws and pull out the clips (screwed and inserted from top to bottom), which secure the upper part of the bumper (radiator grille).
-unscrew the screws in the lower grille (they may not be there).
-unscrew the screws around the perimeter of the lower part (screwed from bottom to top).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
  • LIKE
  • 1
How to remove the front and rear bumper of a Suzuki Jimny (since 1998)


-open the hood.
-under the hood, take out the pins that secure the upper part of the bumper.
-unscrew the screws (screwed from the bottom up) that secure the lower part.
-turn out the wheels depending on which side we are going to disassemble.
  • LIKE
  • 1