How to Remove Front and Rear Bumper Toyota Yaris (2005-2011)

-turn the wheels to the left or right side, depending on which side we will disassemble first.
-unscrew the screws in the wheel arches and take out the pins that secure the fender liners to the bumper.
-move the fender liners to the side and unscrew one screw on each side (screwed from the bottom up), which secure the corners to the fenders.
-under the hood, pull out the pins (inserted from top to bottom), which secure the upper part.
-unscrew the screws along the perimeter of the lower part (screwed from bottom to top).

-with an assistant, release the corners from the latches in the wings and remove the bumper from the guides towards you.
-remove the connector from the fog lights (if any).
-remove the connector from the parking sensors (if any).
-if there are headlight washers, disconnect the hoses (to prevent the liquid from leaking onto the ground, you should prepare a special container).

Rear bumper

-open the trunk lid.
-in the trunk opening under the taillights, pull out the plugs and unscrew the screws.
-in the wheel arches, unscrew the screws and pull out the pins that attach the fender liners to the bumper.
-(sedan) move the fender liners to the side and unscrew one screw on each side (screwed from the bottom up), which attach the corners to the fenders.

-unscrew the screws around the perimeter at the bottom (screwed from bottom to top).
-with an assistant, release the bumper from the latches in the fenders, under the taillights, in the trunk opening and remove it from the guides towards you.

-remove the connector from the parking sensor (if any).
-remove the connectors from the additional equipment (if any).
Tags: