How to remove the front and rear bumper Opel SIGNUM (2003-2008)

-open the hood and pull out the pins that secure the upper part.
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-unscrew the screws in the wheel arches that secure the fender liners.
-unscrew the screws along the perimeter in the lower part and pull out the pins (screwed and inserted from the bottom up).

-with an assistant, release the bumper corners from the latches in the wings and remove them from the guides towards you.
-remove the connector from the fog lights (if any).
-remove the connector from the parking sensors (if any).
-if there are headlight washers, disconnect the hoses (to prevent the liquid from leaking onto the ground, you should prepare a special container).

Rear bumper

-open the trunk lid.
-remove the trim in the opening (held by latches).
-unscrew the screws under the trim.
-unscrew the screws at the bottom (screwed from the bottom up).
-unscrew the screws in the wheel arches (in order not to remove the wheels, it is more convenient to twist with a ratchet with a nozzle).

-with an assistant, release the bumper from the latches in the fenders and under the rear lights.
-remove the bumper from the guides towards you.
-remove the connector from the parking sensors (if any).
Tags: