The bumper is removed together with the amplifier and shock absorbers. From the engine compartment, you need to unscrew four bolts and two nuts that secure the shock absorbers to the side members. Then we pull everything out forward as a whole.
You are logged in as a guest, we recommend that you log in or go
process of registration. If you forgot your password, you can restore it
Navigation
Top News
Statistics
Advertisement
Аrchives
Votes
| Rate the site |
- remove the license plate and frame.
- pull out the plugs under the frame and unscrew the two bolts.
- after 96 there may be screws in the area of the wheel arches.
- pull out the plugs under the frame and unscrew the two bolts.
- after 96 there may be screws in the area of the wheel arches.
Depending on the year of manufacture and body type, the mounting locations differ.
Below are the bumper mounting diagrams. The arrows indicate the locations of the screws and pins.
Below are the bumper mounting diagrams. The arrows indicate the locations of the screws and pins.
-under the hood, pull out the pins (inserted from top to bottom), which secure the radiator grille.
-release the lower part from the latches and remove the radiator grille.
-unscrew the screws along the perimeter of the lower part (screwed from bottom to top).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-release the lower part from the latches and remove the radiator grille.
-unscrew the screws along the perimeter of the lower part (screwed from bottom to top).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-Under the hood, unscrew the two screws and pull out two pistons (screwed and inserted from top to bottom), which secure the radiator grille to the upper bar.
-Under the car, unscrew the screws around the perimeter (screwed from bottom to top), which secure the lower part.
-Turn the wheels to the left or right side, depending on which side we will disassemble first.
-In the wheel arches, unscrew the screws that secure the fender liners.
-under the headlights, unscrew and pull off the wipers.
-open the hood.
-under the hood, between the headlights, pull out the clips.
-behind the lower part of the bumper, unscrew two bolts (screwed from the bottom up).
-open the hood.
-under the hood, between the headlights, pull out the clips.
-behind the lower part of the bumper, unscrew two bolts (screwed from the bottom up).
-open the hood.
-under the hood, unscrew the screws and pull out the pins that secure the upper part of the bumper.
-unscrew the screws along the perimeter of the lower part (screwed from the bottom up).
-turn out the wheels depending on which side we are going to disassemble.
-free the fender liners in the wheel arches.
-under the hood, unscrew the screws and pull out the pins that secure the upper part of the bumper.
-unscrew the screws along the perimeter of the lower part (screwed from the bottom up).
-turn out the wheels depending on which side we are going to disassemble.
-free the fender liners in the wheel arches.
The bumper is removed together with the radiator grille.
-open the hood.
-under the hood, take out four screws that secure the radiator grille.
-from the bottom, unscrew seven screws (screwed from the bottom up), which secure the bottom of the bumper.
-depending on which side we are disassembling, turn out the wheels.
-open the hood.
-under the hood, take out four screws that secure the radiator grille.
-from the bottom, unscrew seven screws (screwed from the bottom up), which secure the bottom of the bumper.
-depending on which side we are disassembling, turn out the wheels.
-unscrew the wheels to the left or right, depending on which side you will disassemble.
-in the wheel arches, unscrew the screws that secure the fender liners to the bumper.
-behind the fender liners, unscrew one screw on each side (screwed from bottom to top), which secure the corners of the bumper to the body.
-open the hood and remove the radiator grille. In the upper part, unscrew four screws (screwed from top to bottom), pull the lower part towards you (held by latches).
-under the grille, unscrew the screws, one near the headlights.
-in the wheel arches, unscrew the screws that secure the fender liners to the bumper.
-behind the fender liners, unscrew one screw on each side (screwed from bottom to top), which secure the corners of the bumper to the body.
-open the hood and remove the radiator grille. In the upper part, unscrew four screws (screwed from top to bottom), pull the lower part towards you (held by latches).
-under the grille, unscrew the screws, one near the headlights.
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-unscrew the screws in the wheel arches and pull out the pins that attach the fender liners to the bumper.
-move the fender liners to the side and unscrew one screw on each side (screwed from the bottom up), which attach the corners to the fenders.
-remove the trim under the hood.
-unscrew the screws in the wheel arches and pull out the pins that attach the fender liners to the bumper.
-move the fender liners to the side and unscrew one screw on each side (screwed from the bottom up), which attach the corners to the fenders.
-remove the trim under the hood.