How to remove the front and rear bumper Opel AGILA B (after 2008)

-turn the wheels to the left or right side, depending on which side we will disassemble first.
-unscrew the screws in the wheel arches and pull out the pins that attach the fender liners to the bumper.
-move the fender liners to the side and unscrew one screw on each side (screwed from the bottom up), which attach the corners to the fenders.
-remove the trim under the hood.

-under the trim, pull out the pins and unscrew the screws (screwed and inserted from top to bottom) that secure the upper part.
-along the perimeter of the lower part, unscrew the screws (screwed from bottom to top).
-with an assistant, release the corners from the latches in the fenders and remove the bumper from the guides towards you.
-remove the connector from the fog lights (if any).
-remove the connector from the parking sensors (if any).

Rear bumper

-open the trunk lid.
-unscrew in the trunk opening.
-unscrew the screws in the wheel arches and pull out the pins that attach the fender liners to the bumper.
-unscrew the screws around the perimeter in the lower part (screwed from bottom to top).

-with an assistant, release the bumper from the latches in the fenders and under the taillights, remove the bumper towards you.
-remove the connector from the parking sensors (if any).
-remove the connectors from the license plate light.
Tags: