Navigation

Top News

Statistics

Advertisement

How to Remove Front and Rear Bumper Pontiac Bonneville (2000-2005)


-open the hood.
-under the hood, pull out five pins that secure the upper part.
-turn the wheels to the side.
-in the wheel arches, pull out three pins on each side that secure the fender liners (front part).
  • LIKE
  • 1


Bumper mounting diagrams. Front bumper.
  • LIKE
  • 1
Author: carsoftos777 | 27-03-2025, 03:48 | How To Remove Bumpers | Views: 23 | Comments: 0
How to remove front and rear bumper VW Lupo


-Under the hood, unscrew the two screws at the edges of the radiator grille.
-Use a flat-head screwdriver to release the edges of the decorative strip of the radiator grille (the places where it connects to the fenders).
-Press the latches at the bottom of the strip with a flat-head screwdriver and remove the radiator grille.
-Unscrew one screw on each side under the radiator grille (screwed in from top to bottom).
  • LIKE
  • 1
Author: carsoftos777 | 27-03-2025, 03:32 | How To Remove Bumpers | Views: 27 | Comments: 0
How to remove front and rear bumper Toyota Picnic


-open the hood and pull out three pistons behind the front bar that secure the upper part of the bumper.
-unscrew the screws along the perimeter of the lower part (screwed from the bottom up).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel arches, pull out the clips and unscrew the screws that secure the fender liners to the bumper.
-move the fender liners to the side and unscrew one screw on each side (screwed from the bottom up), which secure the corners to the fenders.
  • LIKE
  • 1
How to Remove Front and Rear Bumper Toyota Celica (1999-2006)


-open the hood and unscrew the screws (screwed from top to bottom) that secure the upper part of the bumper.
-unscrew the screws along the perimeter of the lower part and pull out the pins (screwed and inserted from bottom to top).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel arches, unscrew the screws that secure the fender liners.
  • LIKE
  • 1
How to remove the front and rear bumper of a Suzuki Kizashi


-open the hood.
-under the hood, unscrew the three screws that secure the upper part of the bumper.
-unscrew the screws along the perimeter of the lower part (screwed from the bottom up).
-turn out the wheels depending on which side we are going to disassemble.
-in the wheel arches, unscrew the screws and release the fender liners.
  • LIKE
  • 1
Author: carsoftos777 | 25-03-2025, 02:19 | How To Remove Bumpers | Views: 60 | Comments: 0


-open the hood.
-under the hood, take out the four pistons (screws) that secure the radiator grille.
-from the bottom, unscrew the screws (screwed from the bottom up) that secure the bottom of the bumper.
-turn the wheels to the side.
-release the fender linings from the bumper (held on by latches).
  • LIKE
  • 1
Author: carsoftos777 | 25-03-2025, 01:58 | How To Remove Bumpers | Views: 20 | Comments: 0
How to Remove Front and Rear Bumper Saturn Ion


-open the hood.
-under the hood, take out the four pins that secure the upper part.
-from the bottom, unscrew the screws and take out the pins that secure the lower part.
-turn the wheels to the side.
-in the wheel arches, take out the pins that secure the fender liners (front part).
-unscrew one screw on each side that secure the corners of the bumper to the fenders.
  • LIKE
  • 1
How to Remove Front and Rear Bumper Toyota Tundra (2007+)


-turn the wheels to the left or right side, depending on which side we will disassemble first.
-unscrew the screws in the wheel arches and pull out the pins that attach the fender liners to the bumper.
-move the fender liners to the side, unscrew the screws and pull out the pins that attach the corners of the lining to the fenders.
-open the hood, unscrew two screws on each side under the headlights and remove the linings.
  • LIKE
  • 1
Author: carsoftos777 | 25-03-2025, 01:16 | How To Remove Bumpers | Views: 32 | Comments: 0


Bumper mounting diagrams. The screws are indicated by arrows.
Depending on the year of manufacture and body type, the mounting locations may differ.
  • LIKE
  • 1