How to remove front and rear bumper VW T-Roc

-open the hood.
-under the hood, take out the four pistons (screws) that secure the radiator grille.
-from the bottom, unscrew the screws (screwed from the bottom up) that secure the bottom of the bumper.
-turn the wheels to the side.
-release the fender linings from the bumper (held on by latches).
-in the wheel arches, unscrew the screws that secure the fender liners (front part).

-Unscrew the screws behind the fender liners that secure the bumper corners to the fenders.
-Release the latches in the fenders (pull the bumper corners toward you).
-Release the latches between the headlights.
-With an assistant, pull the bumper forward (look for wires and hoses).
-Release the electrical equipment connectors (if any).
-Disconnect the headlight washer hoses (if any, fluid may leak).

Rear bumper

-open the trunk lid.
-remove the trims near the taillights.
-unscrew the plastic fasteners from the trunk and remove the taillights.
-unscrew the screws from the bottom and pull out the pins.

-release the fender linings from the bumper (held on by latches).
-unscrew the screws in the wheel arches that secure the fender liners (rear part).
-unscrew the screws that secure the sides of the bumper to the fenders.

-release the latches in the fenders (pull the corners of the bumper towards you).
-release the latches under the taillights. - with an assistant we pull the bumper back (look at the wires).
Tags: