Navigation

Top News

Statistics

Advertisement

Author: carsoftos777 | 18-04-2025, 19:08 | How To Remove Bumpers | Views: 19 | Comments: 0
How to remove front and rear bumper Saturn Aura


-open the hood.
-under the hood, unscrew six screws and pull out two pins that secure the upper part.
-from the bottom, unscrew the screws and pull out the pins that secure the lower part.
-turn the wheels to the side.
-in the wheel arches, unscrew the screws that secure the fender liners.
  • LIKE
  • 1
Author: carsoftos777 | 18-04-2025, 18:36 | How To Remove Bumpers | Views: 15 | Comments: 0
How to remove front and rear bumper Suzuki APV


Depending on the year of manufacture and body type, the mounting locations differ.
Below are bumper mounting diagrams. The arrows indicate the locations of screws, latches, and pins.
  • LIKE
  • 1
How to Remove Front and Rear Bumper Saturn Vue (2002-2007)


-open the hood.
-pull out one piston on each side and remove the turn signals (lift up and pull towards you).
-unscrew one screw on each side behind the turn signals.
-pull out two pistons that secure the upper part.
-pull out the pistons from the bottom that secure the lower part.
-turn the wheels to the side.
  • LIKE
  • 1
How to remove the front and rear bumper Toyota RAV4 CA30W (2005-2012)


-under the hood, pull out the pins and remove the trim.
-under the trim, unscrew the screws and pull out the pins that secure the radiator grille and the upper part of the bumper to the upper bar.
-along the perimeter of the lower part, unscrew the screws (screwed from the bottom up).
-turn the wheels to the left or right side, depending on which side
we will disassemble first.
  • LIKE
  • 1
Author: carsoftos777 | 17-04-2025, 03:38 | How To Remove Bumpers | Views: 21 | Comments: 0


Front bumper
-open the hood.
-under the hood, pull out three pins. Which secure the upper part of the bumper.
-from the bottom, unscrew the screws and pull out the pins that secure the lower part.
-turn the wheels to the side.
  • LIKE
  • 1
Author: carsoftos777 | 17-04-2025, 02:59 | How To Remove Bumpers | Views: 36 | Comments: 0
How to remove the front and rear bumper SEAT Arosa


Depending on the year of manufacture and model variant, the mounting locations may differ slightly.

- open the hood and unscrew the four screws (screwed from top to bottom).
- unscrew the screws and remove the lower side decorative grilles.
- unscrew one screw on each side under the decorative grilles.
  • LIKE
  • 1


Toyota Tundra (2000-2006) Bumper Mounting Diagrams.

  • LIKE
  • 1
How to remove front and rear bumper Saab 900 (1993-1998)


Depending on the year of manufacture and body type, the mounting locations differ slightly.

To remove the front bumper, you need to unscrew the two screws (screwed from top to bottom) under the headlights that secure the bumper reinforcement to the body. Unscrew the screws in the wheel arches and release the clips in the fenders. Then, with an assistant, pull the bumper forward (look for the wires). Disconnect the electrical wiring connectors and headlight washer hoses (if any).
  • LIKE
  • 1


Both the front and rear bumpers of the Renault Espace 2 are attached in four places. One screw on each side, attaching the sides to the fenders and two screws to the body.

  • LIKE
  • 1
Author: carsoftos777 | 14-04-2025, 04:25 | How To Remove Bumpers | Views: 87 | Comments: 0
How to remove the front and rear bumper Skoda Citigo


Depending on the year of manufacture and model variant, the mounting locations may differ slightly.
- open the hood and unscrew the three screws that secure the radiator grille (screwed from top to bottom) and release it from the clips.
- unscrew the wheels to the left or right, depending on which side you will disassemble.
- in the wheel arches, unscrew the screws that secure the fender liners to the bumper.
  • LIKE
  • 1