-open the hood.
-pull out one piston on each side and remove the turn signals (lift up and pull towards you).
-unscrew one screw on each side behind the turn signals.
-pull out two pistons that secure the upper part.
-pull out the pistons from the bottom that secure the lower part.
-turn the wheels to the side.
-in the wheel arches, pull out three pistons (screws) on each side that secure the fender liners (front part).
-move the fender liners to the side and unscrew one screw on each side (screwed from top to bottom), which secure the corners of the bumper to the fenders.
-release the clips in the fenders (pull the corners of the bumper down and towards you).
-with an assistant, pull off the bumper (look for the wires).
-disconnect the electrical equipment connectors (if any).
Rear bumper
-open the trunk lid.
-in the trunk opening, pull out six pins that secure the upper part.
-pull out four pins from the bottom side.
-in the wheel arches, pull out three pins on each side that secure the fender liners.
-release the clips in the fenders.
- with an assistant, carefully pull off the bumper (watch the wires).
- disconnect the electrical equipment connectors (if any).

- 1
Tags: