How to remove the front and rear bumper SEAT Arosa

Depending on the year of manufacture and model variant, the mounting locations may differ slightly.

- open the hood and unscrew the four screws (screwed from top to bottom).
- unscrew the screws and remove the lower side decorative grilles.
- unscrew one screw on each side under the decorative grilles.

- with an assistant, pull the bumper off the guides towards you.
- remove the connector from the parking sensors (if any).
- remove the connector from the fog lights.

Rear bumper

Depending on the year of manufacture and model variant, the mounting locations may differ slightly.
- open the trunk lid and unscrew one screw on each side that secure the taillights.
- remove the taillights.
- under the taillights, unscrew one screw on each side.
- unscrew the screws in the wheel arches that secure the mudguards (in order not to remove the wheels, it is more convenient to unscrew with a ratchet with a nozzle).

-move the mudguards to the side and unscrew one screw on each side (screwed from the bottom up) (may not be there).
-unscrew the screws along the perimeter at the bottom (screwed from the bottom up).
-with an assistant, pull the bumper off the guides towards you.
-remove the connector from the license plate light.
-remove the connector from the parking sensors (if any).
Tags: