The bumper consists of two parts that are connected with clamps, they are removed simultaneously. Depending on the year of manufacture and model variant, the mounting locations may differ slightly.
-Unscrew two screws under the hood and pull out four pistons (screwed from top to bottom) that secure the radiator grille.
-Unscrew the screws and pull out the pistons along the perimeter at the bottom (inserted and screwed from bottom to top).
-Unscrew the wheels to the left or right, depending on which side you will disassemble first.
-in the wheel arches, unscrew the screws that secure the fender liners.
-move the fender liners to the side and unscrew two screws on each side of the fenders (screwed from top to bottom), which secure the corners to the fenders.
-unscrew one screw on each side in the side decorative grilles of the lower part of the bumper.
-with an assistant, pull the bumper off the guides towards you.
-remove the connector from the parking sensors (if any).
-remove the connector from the fog lights.
-if there are headlight washers, disconnect the hose and plug it with a plug so that liquid does not leak out of the tank.
Rear bumper
Depending on the year of manufacture and model variant, the mounting locations may differ slightly.
- open the trunk lid and unscrew two screws on each side that secure the taillights.
- remove the taillights by moving them toward you (the opposite sides of the lights are held in place by latches).
- remove the covers under the taillights (they are held in place by latches).
- unscrew the nuts under the covers.
-pull out the pins at the bottom (inserted from the bottom up).
-unscrew the screws in the wheel arches that secure the mudguards (in order not to remove the wheels, it is more convenient to unscrew with a ratchet with a nozzle).
-move the mudguards to the side and pull out one pin on each side (inserted from the bottom up).
-with an assistant, pull the bumper off the guides towards you.
-remove the connector from the parking sensors (if any).

- 1
Tags: