How to Remove Front and Rear Bumper Toyota Camry XV30 (2001-2006)

-open the hood, unscrew two screws and pull out one piston (screwed and inserted from top to bottom).
-at the very bottom, unscrew seven screws (screwed from bottom to top).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel arches, pull out the pistons that secure the fender liners.

-move the fender liners to the side and unscrew one screw on each side (screwed from the bottom up), which secure the corners to the fenders.
-with an assistant, release the latches in the fenders and pull the bumper off the guides towards you.
-remove the connector from the parking sensors (if any).
-remove the connector from the fog lights (if any).

Rear bumper

Depending on the year of manufacture and type of model, the mounting locations may differ.
- remove the side trim in the trunk (you need to access the fenders from the inside).
- remove the rear panel trim.
Under the trim, you need to unscrew four screws and six nuts:
- unscrew the four nuts in the rear panel.
-unscrew one nut on each side under the taillights.
-unscrew two screws on each side in the fenders (screwed from top to bottom).
-unscrew the screws in the wheel arches that secure the fender liners.

-move the fender liners to the side and unscrew one screw on each side that secure the corners to the fenders (they may not be there).
-pull out the pins along the perimeter at the bottom (inserted from bottom to top).
-with an assistant, pull it off the guides towards you.
-if there is a parking sensor, remove the connector.
Tags: