How to remove front and rear bumper Saturn Aura

-open the hood.
-under the hood, unscrew six screws and pull out two pins that secure the upper part.
-from the bottom, unscrew the screws and pull out the pins that secure the lower part.
-turn the wheels to the side.
-in the wheel arches, unscrew the screws that secure the fender liners.
-move the fender liners to the side and unscrew one screw on each side that secure the corners of the bumper to the fenders.

-release the latches in the fenders (pull the corners towards you).
-with an assistant, pull the bumper forward (look for wires and hoses).
-disconnect the electrical equipment connectors (if any).
-disconnect the headlight washer hoses (if any).

Rear bumper

-open the trunk lid.
- in the side trims of the trunk, open the plugs, unscrew three nuts on each side and remove the taillights.
- remove the rear panel trim.
- behind the trim, on the trunk side, unscrew four nuts.
- unscrew the screws (pins) from the bottom side.
- in the wheel arches, unscrew the screws that secure the fender liners (rear part).
- behind the fender liners, unscrew one screw on each side that secure the corners of the bumper to the fenders.

- release the latches in the fenders (pull the corners towards you).
- use a flat screwdriver to release the clips under the taillights.
- with an assistant, carefully pull the bumper back (watch the wires).
- disconnect the electrical equipment connectors (if any).
Tags: